Liquid solid food industrial separating centrifuge PGZ800
Main features:
PGZ flat bottom discharge mechanical scraper Centrifuge for the flat bottom scraper discharge, intermittent operation, program control of the filter centrifuge. Through advanced PLC programmable controller, frequency conversion governor and brake combination unit, and hydraulic pneumatic, single control center with computer networking. By the hydraulic, electrical control system automatically feeding, separating, washing, dewatering, discharge and other processes, enabling remote operation.
It can be used with particle size 0.05-0.15 mm in the suspension of solid particles separated from the machine no clutch, no brakes tile, especially suitable for thermal sensitivity, the operator should not be close to the separation of materials, fully applicable to explosive, toxic, corrosive industrial field.
The machine has a high degree of automation, large capacity, good separation, running stability, the operation side, etc, can be cleaned from all directions, no basis for the installation, eliminating the conventional hanging machine feet, simplify the installation process. No base plate weight and the selection of isolator types of damping systems to produce the vibration device is completely absorbed, on the basis of the ground and around the equipment without interference, safe and reliable to meet GMP standards.
Structure and principle:
Centrifuge under PG flat to the main bowl parts, the scraper drive, mechanical transmission, chassis and other features modular design, so that you can achieve any combination of multi-functional. Scraper drive a hydraulic, pneumatic, manual, etc.. Start with a variable frequency start, electric brakes. Motor through the belt transmission, drive shaft axis of rotation bowl to form a centrifugal force field. Suspension was separated from the top of the feeding tube into the bowl, falls cloth plate, under the action of centrifugal force, threw the bowl wall, the wall of liquid through the bowl filter, filter pore thrown Chassis space within the chassis together through drain pipes discharge, and solid phase retained in the cloth on the inside. For washing, the washing water through the washing tube to join the washing, after dehydration, low-speed rotating bowl, scraper to scrape the solid phase falling through the bottom of the entrance and exit bowl unloading.
Structure drawings:
Technical parameter: