Specifications

industrial centrifugal dryer machine
PLC
Can be connected to the Internet
Done automatically

industrial centrifugal dryer machine  ----PGZ1250 

 

 

 

Main features:
       

     PGZ flat bottom discharge mechanical scraper Centrifuge for the flat bottom scraper discharge, intermittent operation, program control of the filter centrifuge. Through advanced PLC programmable controller, frequency conversion governor and brake combination unit, and hydraulic pneumatic, single control center with computer networking. By the hydraulic, electrical control system automatically feeding, separating, washing, dewatering, discharge and other processes, enabling remote operation.
     It can be used with particle size 0.05-0.15 mm in the suspension of solid particles separated from the machine no clutch, no brakes tile, especially suitable for thermal sensitivity, the operator should not be close to the separation of materials, fully applicable to explosive, toxic, corrosive industrial field.
     The machine has a high degree of automation, large capacity, good separation, running stability, the operation side, etc, can be cleaned from all directions, no basis for the installation, eliminating the conventional hanging machine feet, simplify the installation process. No base plate weight and the selection of isolator types of damping systems to produce the vibration device is completely absorbed, on the basis of the ground and around the equipment without interference, safe and reliable to meet GMP standards.
    
Main use:
       

      Widely used in solid-phase particulate suspension for the filtering, flat In addition to general purpose,, Tebieshiyong Yu density, toxic and harmful, flammable, explosive medium of the liquid Gu Fen Li Deng, for the pharmaceutical, food, chemical , defense and other industries in the area of raw materials, intermediates and finished product liquid-solid separation.

Structure and principle:
    

     Centrifuge under PG flat to the main drum parts, the scraper drive, mechanical transmission, chassis and other features modular design, so that you can achieve any combination of multi-functional. Scraper drive a hydraulic, pneumatic, manual, etc.. Start with a variable frequency start, electric brakes. Motor through the belt transmission, drive shaft axis of rotation drum to form a centrifugal force field. Suspension was separated from the top of the feeding tube into the drum, falls cloth plate, under the action of centrifugal force, threw the drum wall, the wall of liquid through the drum filter, filter pore thrown Chassis space within the chassis together through drain pipes discharge, and solid phase retained in the cloth on the inside. For washing, the washing water through the washing tube to join the washing, after dehydration, low-speed rotating drum, scraper to scrape the solid phase falling through the bottom of the entrance and exit drum unloading.

 

 

principle chart

 

 

 

Structure chart

 

                                                                 

 

 

 Washing

 

 

 

Technical parameter

 

 

 

We also can provide as follow products