Specifications

straw powder shapping device
1.flat die pellet mill
2.easy to operate and maintain
3.offer installation if needing

 straw powder shapping device

 

detailed information

•  The machine adopts speed-adjust feeder to control the feeding capacity, and use big diameter modulator to make materials fully cured,and make the pellet smoother.The formation rate reaches 98%.
•  The moisture of raw material is 15%-18%.
•   The final size of the product is between 4-8mm.
•    The capacity is between0.2-2 t/h.

 raw material

•  The raw material could be straw, wood -dust,bamboo powder,cotton wood ,peanuts shell, clover,etc.can mix with all kinds of powder materials
• Moisture lower than 15%,if the raw material has high moisture ,it should be reduced by sun drying or using flash drier
• Size smaller than 4mm,if the raw material cannot achieve the requirement ,it should be crushed firstly

 

 

 

                        r a w    m a t e r i a l