Specifications

FYY ultra purewater treatment equipment used in general experiments and lab utensils cleaningdrinking for animals in experiment

FYY lab pure water machineused in general experiments and lab utensils cleaningdrinking for animals in experiment

The unique range of compact  FLOM water purification systems uses advanced technology

Produces both pressurized pure and ultrapure water from tap water, all through a single unit

Dual POD (Point of Delivery) concept save space and increase convenience

Lower running costs and water waste with exclusive Elix Technology

A full range of systems cover all your lab water needs from 5l to 20l per hour

Total control over water quality and quantity at the point of delivery

Pure water from the system answers EU and USP pure water requirements

Ultrapure water is adequate for the most demanding research and QC applications (UPLC, LC-MS, mammalian cell culture, DNA sequencing, PCR..)

On-line resistivity  give users control over the water purification process and final water quality (designed in agreement with USP suitability test requirements)

  

Basic type	FYY0502-RO-P	double	5L/H	≥0.1MΩ.cm ≤10μS/cm	1,Inlet water: general municipal tap water; 2,Raw water TDS≤750PPm 3,Inlet water pressure: 0.15-0.5Mpa, 4,Inlet water temperature:5-40°C 5,Producing Water Quality:  conductivity≤10μS/cm  resistivity≥0.1MΩ.cm 6,Water flow rate: 1-2.L/min(5-20L) 1-10L/min(30L-1T)  7,Voltage: 220VAC/50HZ   8,Power: 50W-400KW(5-20L); 50W-3KW(30L-1T) 9,Size: 430*501*530mm(5-20L); 600*700*1300mm (30L-1T)                                   10,NW: 30KG(5L-20L); 50-100KG(30L-1T) 11,electronics components are imported components, automatic microcomputer control
	FYY1002-RO-P	double	10L/H
	FYY1502-RO-P	double	15L/H
	FYY2002-RO-P	double	20L/H
	FYY3002-RO-P	double	30L/H
	FYY4002-RO-P	double	40L/H
	FYY5002-RO-P	double	50L/H
	FYY6002-RO-P	double	60L/H
	FYY8002-RO-P	double	80L/H
	FYY10002-RO-P	double	100L/H

 lab pure water machineused

1,Inlet water: general municipal tap water;
2,Raw water TDS≤750PPm
3,Inlet water pressure: 0.15-0.5Mpa,
4,Inlet water temperature:5-40°C
5,Producing Water Quality:  conductivity≤10μS/cm  resistivity≥0.1MΩ.cm
6,Water flow rate: 1-2.L/min(5-20L) 1-10L/min(30L-1T) 
7,Voltage: 220VAC/50HZ  
8,Power: 50W-400KW(5-20L); 50W-3KW(30L-1T)
9,Size: 430*501*530mm(5-20L);
600*700*1300mm (30L-1T)                                  
10,NW: 30KG(5L-20L); 50-100KG(30L-1T)
11,electronics components are imported components, automatic microcomputer control