Specifications

100L/H EDI module
1.integrates electrodialysis and mixed bed.
2.no aicd-base reclaim.
3.3.8M3/h only consumes 1KW

100L/H EDI module

Equipment introduction

With unique design, It makes inlet water pass freshwater room filled with self-born resin, and makes the impurity ion in water absorbed by resin, thus gain pure water.

Characteristics

1, With ultralong purified channel design ,makes influent water route bigger,the time of purification longer, output water quality stable.

2, With independent seal ring design, It stops membrane reactor leaking.

3, It needs no washing and regeneration.

4, Concentrated water, Electrolyte water can be recycled, effectively saving use-cost; 

5, It's easy to operate and maintenance, and convenient to use.

6, Components and parts are designed independently, can ensure products quality stable.

Application Area

1. Chemical water treatment of power plant

2. Electronics,Semiconductor,Precision Mechanism industries’ ultra-pure water

3. Preparation of Foods,Beverage,drinking water

4. Small Purified Water Station,Group drinking water

5. Water for Fine Chemical Industry,Fine tip subjects

6. Preparation of ultra-pure water for other industries

7. Pharmaceutical Industry process water

8. Desalination of sea water and brackish water

Technical Parameters

Parameters		FS100
Flow related parameters (L/H)	producing water	99-101
	Electrolyte water	≥15
	Concentrate water	≥20
Working referenced Voltage(V)		60
Working referenced current(A)		0.03
Inter water pressure producing water  (Mpa)		≤0.3
Inter ater pressure of Electrolyte water (Mpa)		≤0.15
Inter water pressure of concentrate water (Mpa)		≤0.15
Water recovery rate (Remark: Need special connection Pipes)		≤95%
Producing water Specification (MΩ.cm)		15-18.2

Remarks

1, All data above are about Flom business type EDI module-FS50 gained from laboratory, If users need to gain high quality ultrapure water in long term, please obey strictly operating process and operating data required in EDI module operation book.

2, If users need large size (500L/H,1T/H,etc) EDI module, please consult Flom R&D department.