ST-1 alloy steel load cell
USD $69.99 - $999.99 /Set
Min.Order:10 Sets
Hangzhou Everight Electronic Co., Ltd.
alloy steel load cell
Features
The elastomer of ST-1 load cell is made from high quality alloy steel. High precision and good impact resistance; anti-side load capability; compact structure; easy installation.
Specifications
Output sensitivity | mV/V | 2.00 | |||
Nonlinearity | %FS | ≤0.025 | |||
Hysteresis | %FS | ≤0.025 | |||
Repeatability | %FS | ≤0.01 | |||
Zero balance | %FS | ≤1.00 | |||
Creep (in 30min) | %FS/30min | ≤0.02 | |||
Zero efficient | %FS/10°C | ≤0.04 | |||
Rated output efficient | %FS/10°C | ≤0.02 | |||
Input resistance | Ω | 385±10 | |||
Output resistance | Ω | 350±3 | |||
Insulation resistance | MΩ | ≥5000 | |||
Safe overload | %FS | 150 | |||
Compensated Temp.range | °C | -10~+40 | |||
Recommended Supply voltage | V | 5~15 | |||
4-Core shield cable 3 m | Input | +: Red | -:Black | ||
Output | +:Green | -:White | |||
Shield | Yellow or Bare | ||||
Warning: It will affect the function of sensor to change the cable’s length!