CLEANING OF dry powder inhaler (DPI):

L Clean dry powder inhaler (DPI)once a week.

L Open the dry powder inhaler (DPI)protection cap and the mouthpiece.

L Push up the gray push button. Wash the dry powder inhaler (DPI)parts with warm water and absorb the water with soft and clean material.

L Do not close the protection cap, mouthpiece and back piece until dry for 24 hours.



INSTRUCTIONS TO USE dry powder inhaler (DPI):

1. Open the protection cap and the mouthpiece.

2. Take a capsule out of the blister strip, and put it into the capsule cavity.

3. Cover the mouthpiece on the capsule cavity tightly.

4. Hold the DPI upright with the mouthpiece upwards between thumb and the fingers; Fully press the gray push button with thumb once by quick and firm pressure. For the user to puncture the capsule to inhale the powder.

5. Take a deep breath, and then exhale completely.

6. Keep head vertical; Insert the mouthpiece of the DPI completely into your mouth. Close mouth tightly, breathe in steadily as deep as you can. The speed is fast enough to hear the vibration of the capsule if by correct way. Remove the DPI from your mouth; Hold your breath for about 5-10 seconds so that your lung can take up the medication. Repeat from step 5 and 6, until all capsule powder is inhaled completely.

7. Open the mouthpiece, pour out the capsule and discard the empty capsule. Close the mouthpiece and the protection cap.

8. After completion of the inhalation, rinse your mouth with water, do not swallow.