Product Details

Specifications

ac dc switch mode power supply for high frequency
1.CE ROHS approved.
2.2 years warranty
3.95% efficiency

TH110D10ZZ series Switching power supply

1.Genal info :

smps rectifier TH110D10ZZ-220AC detailed specification:

Parameter		220V AC input 110V DC output power module
		TH110D10ZZ-220AC
Input	Input voltage	220V AC±25%, single phase
	AC input frequency	45Hz ~ 65Hz
	Efficiency	≥95%
	Power factor	≥0.93
Output	Output voltage	95-150V adjustable
	Output current	1-10A
	power (W)	1500
	Start delay	3 ~ 8s
	Current stabalization	≤ ± 0.5%
	Ripple	≤ 0.2%
	Voltage stabalization	≤ ± 0.5%
	Inter-rectifier Current sharing imbalance	≤ ± 3%
Cooling method		Natural cooling with heat sink
Protocal		RS485 or RS232
Accoustic noise		<50dB
Protection	Multi-protection	Multi-protection including input over or under-voltage, output over or under-voltage, over-temperature, reverse connection, phase failure, and short circuit protection. The rectifier will shut down without output, and will return to normal operating after fault is cleared.
	Automatic current limiting	The output current will keep fixed without increase after it exceed the set point.
Environment	Operation ambient temperature	-20°C ~ 50°C
	Storage temperature	-40°C~ 60°C
	Relative humidity	≤ 90%
	Air pressure	70 ~ 106kPa
Safety	Insulation resistance	I/O to chassis and input to output >10MΩ (Test voltage: 500Vdc)
	Dielectric strength	Impose 2000Vdc between I/O and the chassis aftering shorting the input and output for one minutes. No breakdown or flashover
Mechanical	Size (H × W × D) mm	218×116×260
	Weight	5.2kg

Features:

1:Patent technology, soft switch during the whole switching process.

2:High efficiency : ≥95%

3.:Rectifiers parallel could increase the output current to any range, output voltage keep the same 110V or 220V DC.

4:Small size, light weight

5:Natural cooling with heat sink, low failure rate

6:CE, RoHS, UL approval

7:Compatible detecting module is available, including monitoring system, insulation status detector, battery detector, Complex 8:information detector etc.

9:Adopt protocal CDT or MODBUS, with interface RS232 and RS485 betwwen the detecting modules.

10:The software and components on the module could be customized according to your requirements.

2.Products showcase: