electronic car battery charger module for ev charging station

electronic car battery charger module for ev charging station

USD $2,000 - $2,500 /Unit

Min.Order:1 Unit

Supply Ability:
10000 Unit / Units per Month
Port:
tianjin
Payment Terms:
T/T Credit Card

Quick Details View All >

Place of Origin:
Hebei, China
Brand Name:
TonHe
Model Number:
TH700q17nz car battery charger
Output Power:
Other, 12KW
Output Type:
Single
Input Voltage:
380V

Shijiazhuang Tonhe Electronics Technologies Co., Ltd.

Business Type: Manufacturer,Trading Company
Shijiazhuang Hebei China
Main Products: Switch Mode Power Supply Module ,On Board Charger ,EV Charging Station ,Battery Charger ,Rectifier module

Product Details

Specifications

1.car battery charger module for ev charging station efficiency above 92%
2. multiple protection
3,lighter and smaller size

car battery charger module for ev charging station detailed specification :

 

 

 
         Type and Model      
   Quick Charging
     Parameter  TH700Q15NZTH450Q14NZ-ATH700Q17NZTH400Q35NZTH600Q25NZTH750Q20NZ
InputInput voltage380V AC±15%, 3 phase380V AC±15%, 3 phase
AC input frequency45Hz ~ 65Hz45Hz ~ 65Hz
Efficiency92%93%93%92%92%92%
Power factor0.99 (APFC), or 0.93 (PPFC)
OutputOutput voltage450-750V300-450V400-700V200-400V300-600V450-750
Output current16A14A17A35A25A20A
power12KW6KW12KW14KW15KW15KW
Start delay3 ~ 8s
Total harmonic current 5% (APFC), or 30% (PPFC)
Current stabalization ± 1%
Voltage stabalization ± 0.5%
Current sharing imbalance for Rectifiers Parallel ± 5% ± 3% ± 3% ± 5% ± 5% ± 5%
Cooling methodForced cooling with fan
ProtocalRS485 and RS232, CAN
ProtectionMulti-protectionMulti-protection and Warning, including input over or under-voltage, output over or under-voltage, over-temperature, reverse connection, phase failure, and short circuit protection. The rectifier will shut down without output, and will return to normal operating after fault is cleared.
Output DC voltage and current adjustable, output over or under-voltage set-point adjustable, output over-current set-point adjustable
Automatic current limitingThe output current will keep fixed without increase after it exceed the set point.
EnvironmentOperation ambient temperature-20°C ~ 50°C
Storage temperature-40°C~ 60°C
Relative humidity 90%
Air pressure70 ~ 106kPa
SafetyInsulation resistanceI/O to chassis and input to output >10MΩ (Test voltage: 500Vdc)
Dielectric strengthImpose 2500Vdc between I/O and the chassis aftering shorting the input and output for one minutes. No breakdown or flashover
MechanicalSize (H × W × D) mm482×88×500450×85×260482×88×500680×133×600680×133×600680×133×600
Weight20kg10kg20kg46kg46kg46kg

 

key characteristics :

 

1. use power factor correction technology, low pollution to the grid

2. use automatic current sharing technology . several modules can work in parallel operation , whihch expand the output power .

3.built in radiator , fan cooling

4. Multiple protection , including over temperature , over current ,over voltage ,reverse connection protections .

 

Contact Supplier

Mr. Jack Peng Manager Chat Now
Telephone
86-0311-66685638
Mobile
8615533948929
Fax
86-0311-86080409
Address
Building 12,Tianshan sci-tech Industrial Park ,No.319,Xiangjiang Road,High&New technology industrial development zone,shijiazhuang Shijiazhuang,Hebei

You May Like

New Products

Recommended Products

View More View Less

Find Similar Products By Category

Electrical Equipment & Supplies > Power Supplies > Switching Power Supply
Categories
Hi~