Product Details

Specifications

1.Electronic Vehicle Charger Soft switch in all progress
2.High efficiency,
3.multi protection

Electronic Vehicle Charger &EV charge station

Input 3 phase 380V or single phase 220V, output 30-100,100-750V DC, electric car charging, electric vehicle charger

Parameter		EV Charging Station Power Module
		TH400Q15NZ-220AC	TH350Q30NZ	TH450Q14NZ-A	TH750Q20NZ	TH90Q130NZ	TH92Q50NZ	TH80Q40NZ-S
Input	Input voltage	220V AC±15%	380V AC±15%, 3 phase			380V AC±15%, 3 phase		220V AC±15%
	AC input frequency	45Hz ~ 65Hz				45Hz ~ 65Hz
	Efficiency	≥90%	≥92%	≥93%	≥92%	≥92%
	Power factor	≥0.99 (APFC), or ≥0.93 (PPFC)				≥0.99 (APFC), or ≥0.93 (PPFC)
Output	Output voltage	50-500V	150-350V	300-450V		40-90V	60-96V	30-80V
	Output current	5A	30A	14A	20A	130A	50A	40A
	power	2.5KW	10KW	6KW	15KW	12KW	12KW	3.2KW
	Start delay	3 ~ 8s				3 ~ 8s
	Total harmonic current	≤ 5% (APFC), or ≤ 30% (PPFC)				≤ 5% (APFC), or ≤ 30% (PPFC)
	Current stabalization	≤ ± 1%				≤ ± 1%
	Voltage stabalization	≤ ± 0.5%				≤ ± 0.5%
	Inter-rectifier Current sharing imbalance	≤ ± 3%	≤ ± 5%	≤ ± 3%	≤ ± 5%	≤ ± 3%
Cooling method		Forced cooling with fan				Forced cooling with fan
Protocal		RS485 and RS232, CAN				RS485 and RS232, CAN
Protection	Multi-protection	Multi-protection including input over or under-voltage, output over or under-voltage, over-temperature, reverse connection, phase failure, and short circuit protection. The rectifier will shut down without output, and will return to normal operating after fault is cleared.
	Automatic current limiting	The output current will keep fixed without increase after it exceed the set point.
Environment	Operation ambient temperature	-20°C ~ 50°C
	Storage temperature	-40°C~ 60°C
	Relative humidity	≤ 90%
	Air pressure	70 ~ 106kPa
Safety	Insulation resistance	I/O to chassis and input to output >10MΩ (Test voltage: 500Vdc)
	Dielectric strength	Impose 2000Vdc between I/O and the chassis aftering shorting the input and output for one minutes. No breakdown or flashover
Mechanical	Size (H × W × D) mm	150×88 ×400	482×88 ×500	450×85 ×260	680×13 ×600	482×88 ×450	360×260 ×360	88×230 ×400
	Weight	8kg	20kg	10kg	46kg	20kg	10kg	5kg

Main Features:
1. Accounts managements.                     2. Billing function.
3. Card reading and writing.                     4. Man-machine interface
5. Language reading sound                     6. Deal data storage
7. Operation monitoring                             8. Self-checking
9. Parameter setting                                  10. Safety protection
11. Time recording                                    12. Software upgrading
13. Time revise                                           14. Encryption function
15. Card writing function after power-off.

Parameter		Integrated EV Charging Station
		THEV350V300A	THEV500V200A	THEV750V150A
Input	Input voltage	380V AC±15%, 3 phase
	AC input frequency	45Hz ~ 65Hz
	Efficiency	≥92%
	Power factor	≥0.99 (APFC), or ≥0.93 (PPFC)
Output	Max output voltage	350V DC	500V DC	750V DC
	Max output current	300A	200A	150A
	power	105KW	100KW	112.5KW
	Start delay	3 ~ 8s
	Total harmonic current	≤ 5% (APFC), or ≤ 30% (PPFC)
	Current stabalization	≤ ± 1%
	Voltage stabalization	≤ ± 0.5%
	Current sharing imbalance for Rectifiers Parallel	≤ ± 5%
Cooling method		Forced cooling with fan
Protocal		RS485, RS232, CAN
Protection	Multi-protection	Multi-protection and Warning, including input over or under-voltage, output over or under-voltage, over-temperature, reverse connection, phase failure, and short circuit protection. The rectifier will shut down without output, and will return to normal operating after fault is cleared. Output DC voltage and current adjustable, output over or under-voltage set-point adjustable, output over-current set-point adjustable

	Automatic current limiting	The output current will keep fixed without increase after it exceed the set-point, set-point adjustable.
Environment	Operation ambient temperature	-25°C~ 75°C'
	Storage temperature	-25°C~ 75°C'
	Relative humidity	≤ 90%
	Air pressure	70 ~ 106kPa
Safety	Insulation resistance	I/O to chassis and input to output >20MΩ (Test voltage: 500Vdc)
	Dielectric strength	Impose 2500Vdc between I/O and the chassis aftering shorting the input and output for one minutes. No breakdown or flashover
Mechanical	Cabinet Size (W × D × H) mm	800×800×2260