110V rectifier battery charger DC power supply from 380VAC
Negotiable
Min.Order:1
Shijiazhuang Tonhe Electronics Technologies Co., Ltd.
Integrated DC power system
Main Features:
(1) modular design characteristic of switching power supply
(2) redundancy hot standby
(3) adjustable to various power networks with super-wide voltage input range
(4) rectifiers being hot-pluggable, convenient for online maintenance
(6) with the patent switching technology, the rectifiers features high efficiency with low EMI
(7) low difference active load sharing of rectifiers ensures inter-rectifier imbalance rate of only 3%
(8 ) CE safety and EMC certified rectifiers, ensuring reliability and safety
(9) open interface design with strong communication function, RS485, or RS232
(10) automatic battery management and protection, with real-time monitor function over battery operation state and parameters
Main Component:
(1) AC input distribution: AC distribution cabinets.
(2) Rectification: rectifiers and insulation diodes
(3) DC output distribution: diode chain, IMS, switching branches (connected to the switching bus), and control branches (connected to the control bus).
(4) Monitoring system: power control unit (PCU) and distribution monitoring box.
(5) All the modules and components could be customized accordingly.
1. smps rectifier TH110D10ZZ-220AC detailed specification:
Parameter | 220V AC input 110V DC output power module | ||||||||||
TH110D10ZZ-220AC | |||||||||||
Input | Input voltage | 220V AC±25%, single phase | |||||||||
AC input frequency | 45Hz ~ 65Hz | ||||||||||
Efficiency | ≥95% | ||||||||||
Output | Output voltage | 95-150V adjustable | |||||||||
Output current | 1-10A | ||||||||||
power (W) | 1500 | ||||||||||
Start delay | 3 ~ 8s | ||||||||||
Current stabalization | ≤ ± 0.5% | ||||||||||
Ripple | ≤ 0.2% | ||||||||||
Voltage stabalization | ≤ ± 0.5% | ||||||||||
Inter-rectifier Current sharing imbalance | ≤ ± 3% | ||||||||||
Cooling method | Natural cooling with heat sink | ||||||||||
Protocal | RS485 or RS232 | ||||||||||
Accoustic noise | <50dB | ||||||||||
Protection | Multi-protection | Multi-protection including input over or under-voltage, output over or under-voltage, over-temperature, reverse connection, phase failure, and short circuit protection. The rectifier will shut down without output, and will return to normal operating after fault is cleared. | |||||||||
Automatic current limiting | The output current will keep fixed without increase after it exceed the set point. | ||||||||||
Environment | Operation ambient temperature | -20°C ~ 50°C | |||||||||
Storage temperature | -40°C~ 60°C | ||||||||||
Relative humidity | ≤ 90% | ||||||||||
Air pressure | 70 ~ 106kPa | ||||||||||
Safety | Insulation resistance | I/O to chassis and input to output >10MΩ (Test voltage: 500Vdc) | |||||||||
Dielectric strength | Impose 2000Vdc between I/O and the chassis aftering shorting the input and output for one minutes. No breakdown or flashover | ||||||||||
Mechanical | Size (H × W × D) mm | 218×116×260 | |||||||||
Weight | 5.2kg |
Features:
1:Patent technology, soft switch during the whole switching process.
2:High efficiency : ≥95%
3.:Rectifiers parallel could increase the output current to any range, output voltage keep the same 110V or 220V DC.
4:Small size, light weight
5:Natural cooling with heat sink, low failure rate
6:CE, RoHS, UL approval
7:Compatible detecting module is available, including monitoring system, insulation status detector, battery detector, Complex 8:information detector etc.
9:Adopt protocal CDT or MODBUS, with interface RS232 and RS485 betwwen the detecting modules.
10:The software and components on the module could be customized according to your requirements.
Rectifier Module
production line :