Product Details

Specifications

0.5mm 24awg 25 pairs copper tape shield telephone cable pure copper
1.rodent protection
pper shield
3.10-1500 pairs

0.5mm 24awg 25 pairs copper tape shield telephone cable pure copper

Product Description

These types of Cables are designed for use in direct burial applications where additional mechanical or rodent protection is required. Cables may be used aerially, but must be attached to a support strand. These cables are recommended for use in high-risk areas where additional mechanical or rodent protection is requirement..

Conductor Solid annealed copper

Insulation Solid polyolefin; color coded in accordance with industry standards

Twisted Pairs

Individual insulated conductors; twisted into pairs with

varying lay lengths; specific color combinations provide

pair identification

< 25-Pair Core Pairs are assembled into a cylindrical core

> 25-Pair Core

Cables larger than 25-pair are assembled into units, which are then used to assemble the core; units are identifiable using color-coded binders

Filling Compound 80°C jelly filled compound, completely filling the interstices between the pairs and under the core wrap

Core Wrap Non-hygroscopic, dielectric tape applied over the core

Shield Corrugated, rodent resistant, copper bearing armor applied longitudinally with an overlap; flooded shield interfaces

Jacket Black, polyethylene

Jacket Marking

Identifying information includes a telephone handset, cable code, pair count, AWG, date of manufacture and sequential length markings at 2 foot intervals

Standards Compliance

ANSI/ICEA S-84-608-2007

RDUP 7 CFR 1755.390 (PE-39)

RoHS-compliant

Electrical specifications

Average mutual capacitance at 1000 Mhz

Total number of pairs nf/km
12 or less 52+/-4
Over 12 52+/-2
Conductor size		Minimum insulation Resistance 20 degree	Max average attenuation 20 degree 772khz	Max conductor resistance at 20 degree Ohms	Resistance unbalance maximum		Dielectric strength dc potential- volts minimum
AWG	MM	Gig ohm/km	Db/km	km	Ave %	Individual pair %	Cdr. To cdr	Cdr.to grnd
19 22 24 26	0.9 0.64 0.5 0.4	1.6 1.6 1.6 1.6	10.9 15.3 19.4 23.6	28 56.5 89.5 144.2	1.5 1.5 1.5 1.5	5.0 5.0 5.0 5.0	5,000 4,000 3,000 2,400	10,000 10,000 10,000 10,000

Near end crosstalk (next) at 150kHz 772kHz
P.S.WUnext mean (db) 58 47 P.S.WUNEXT mean (db) 53 42
Far end crosstalk at 150Khz
Conductor size (awg) 19 22 24 26
P.S ELFEXT mean (db/kft) 65 63 63 61 P.S ELFEXT worst pair (db/kft) 59 57 57 57
Far endcross at 772 kHz
Conductor size (awg) 19 22 24 26
P.S ELFEXT mean (db/kft) 51 49 49 47 P,S elfext worst pair (db/kft) 45 43 43 43
Capacitance unbalance pair to pair
Pairs 12 or less More than 12	Maximum individual Pf/km 2625 2625	Maximum RMS Pf/km ~ 574
Capacitance unbalance pair to ground
Pairs 12 or less More than 12	Maximum individual Pf/km 2625 2625	Maximum RMS Pf/km ~ 574