Specifications

Hengrui Wet-Mix Shotcrete Machine adopts high wear-resisting, non-stick plastic material, effectively reduce the dust, lower the

Products Description
Application
1.Hengrui Wet-Mix Shotcrete Machine can be furnished with explosion proof motor and rubber wheel.

2. Be widely used for tunnel, culvert, subway, hydro-power engineering, mines,
    underground excavation engineering,slope stabilization, etc.
FEATURES

1  Hengrui shotcrete machine adopts the damp type or wet type to spray. Both the straight-way

    type rotor material cavity and the discharge elbow adopt the high wear-resisting and non-stick

    plastic material so that completely eliminate the trouble of adhesive or clog of the machine and

    effectively reduce the dust , lower the rebound.

2 It adopts the operation principle of low-voltage, low-speed vortex airflow supplying and close

   range spraying, overcoming the question of pipe-clog, pulse of stopping up ,emanating etc,

   enable spraying the material flow evenly and steadily, improve the quality of spraying layer.

3 Hengrui equipment is especially suited to damp spraying operation and adding steel (chemical)

   fiber operation; reduce in tide, reduce the dust and rebound by a wide margin, improve the

   operation environment. The dust density can be reduced to under 20 mg/m², the reboud rate

   does not exceed 15% , the intensity of spraying layer can get up to 20-30 Mpa.

 

TECHNICAL PARAMETERS

 

Item	Unit	HPZ-5	HPZ-7	HPZ-9	HSP-2000
Output	m3/h	5	6.5	8	5-6
Water-to-cement Ratiio	--	0.4	0.4	0.4	0.4
Max Aggregate Size	mm	15	15	20	15
Hose Diameter	mm	50	50	65	64
Wind Pressure	Mpa	0.2-0.4	0.2-0.4	0.2-0.4	0.3-0.6
Air Consumption	m3/min	7-8	7-8	10-12	12-15
Feeding Height	m	1.1	1.1	1.1	1.22
Max Transmission	m	200	200	200	30
Motor Power	KW	5.5	5.5	7.5	7.5
Voltage	V	380	380	380	380
Size	m	1.25×0.78×1.20	1.25×0.78×1.20	1.30×0.80×1.30	2.02×0.94×1.22
Weight	KG	550-700	700	850	1500