Specifications

1. Rubber sheet
2. two layers
3.Color available; green ,blue, grey,etc
4.glossy or dull surface
5. Color light blue

ESD Rubbr Mat.

 

Description

 

1.Anti-static rubber mat or ground mat should be laid out in the workshops and advanced laboratories for microelectronic industries such as electronic semi-conduct devices, electronic computers, electronic communication equipment and integrated circuits etc.

 

2.To eliminate damages caused by static electricity.

 

 When anti-static rubber mat (ground mat) are laid out and grounded, the working surface will discharge the static electricity of human bodies so that a near-equipotential can be maintained for ESEDS tweezers, tools, utensils and instruments, through which human bodies contact the working table and static sensitive devices(SSD) are free from broadband interference produced by static discharging such as triboelectrification etc. In this way, electrostatic protection is realized.

 

Parameter of rubber mat  (thickness: 2mm )
Static Dissipation layer	Surface resistance	107-109 Ω
	Friction static voltage	<100V
Conductive layer	Surface resistance	not exceed 106Ω
	Friction static voltage	<50V
Static decay time	5000V-500V	<1.9s
Volume resistance	107-1010 Ω

 

Test Item		Test Result
Tension Strength		3.6Mpa
Breakage coefficient of elongation		188%
Tear strength(right angle)		20.6KN/M
Resilience (6pcs sheets lapping over)		14%
Temperature of impact embrittlement (not cut)		-25°C No damage
Permanent variation under 70°C*22h, 25% compression		17.9%
Aging in hot air(70°C*22h)	Variation of tension strength	+8.0%
	Variation of breakage coefficient of elongation	-3.8%
	Heat loss	1.08%
Test Standard: GB1040, GB/T529, GB1681, GB5470, GB10654, GB/T7141

 

More relative pictures: