alibaba china manufacture stianless steel expanded metal lath good product
USD $10 - $50 /Square Meter
Min.Order:10 Square Meters
Hebei Hightop Metal Mesh Co., Ltd.
alibaba china manufacture 11.15kg/m2 weight expanded metal mesh good products
alibaba china manufacture stianless steel aluminum expanded metal mesh good products
Aluminimum / galvanized steel plate expanded metal mesh /expanded mesh production line
Hot sales Small Hole iron Expanded Metal Mesh Sheet Alibaba China
China Supplier Small MOQ Galvanized Expanded Metal Mesh For Walkways
stianless steel expanded metal lath good product
Product Description
Expanded Metal is an extraordinarily versatile material - one with thousands of uses. It comes in four basic types, and it has four primary areas of application.
Basic types are raised (or standard), flattened and architectural (or decorative) meshes. The major areas of use are for enclosure, protection, support and decoration.
Expanded metalproducts are produced from solid sheets or plates of carbon, galvanized and stainless steel, as well as aluminum and a variety of alloys of copper, nickel, silver, titanium and other metals.
Standard Expanded Metal: Expanded metal as it comes off the machine. The strands and bonds are set at a uniform angle to the plane of the sheet. This adds strength and rigidity, allows air circulation, and distributes the load on the metal to the supporting frames as well as making a skid resistant surface.
Flattened Expanded Metal: Manufactured by passing the standard expanded sheet through a cold roll reducing mill parallel to the LWD. By flattening the sheet, the bonds and strands are turned down to produce a smooth and flat surface, reducing the overall thickness and elongating the diamond pattern (LWD). Cross roll flattening is done by passing the expanded metal sheet through a cold roll reducing mill parallel to the SWD. The result is the same except the diamond pattern SWD is elongated.
Decorative Expanded Metal: Specially designed expanded metal for use in architectural and decorative applications. These design can be used to provide privacy and to control light and air while allowing visibility. Sun screens, room dividers, and building facades are only a few of the possible design possibilities. Available in carbon steel, aluminum and other alloys in a wide range of patterns and gauges. Most of these patterns are produced on a special order basis only.
Features
Lightweight
Economical
Versatile
Low Maintenance
Can be bent or formed in any direction
U-edging for finished edges
Specification
Carbon Steel-Standard | ||||||||
style | Design | Opening | Size of | Overall | Percent | |||
Size | Strands | Strands | Thickness | Open | ||||
(Inches) | (Inches) | in inches | inches | Area | ||||
SWD | LWD | SWO | LWO | Width | Thickness | |||
1/4" #20 | 0.25 | 1 | 0.125 | 0.718 | 0.072 | 0.036 | 0.135 | 45 |
1/4" #18 | 0.25 | 1 | 0.11 | 0.718 | 0.072 | 0.048 | 0.147 | 43 |
1/2" #20 | 0.5 | 1.2 | 0.438 | 0.938 | 0.072 | 0.036 | 0.14 | 80 |
1/2" #18 | 0.5 | 1.2 | 0.438 | 0.938 | 0.088 | 0.048 | 0.172 | 72 |
1/2" #16 | 0.5 | 1.2 | 0.375 | 0.938 | 0.087 | 0.06 | 0.175 | 65 |
1/2" #13 | 0.5 | 1.2 | 0.312 | 0.938 | 0.096 | 0.092 | 0.204 | 57 |
3/4" #16 | 0.923 | 2 | 0.813 | 1.75 | 0.101 | 0.06 | 0.21 | 78 |
3/4" #13 | 0.923 | 2 | 0.75 | 1.688 | 0.096 | 0.092 | 0.205 | 76 |
3/4" #10 | 0.923 | 2 | 0.75 | 1.625 | 0.144 | 0.092 | 0.29 | 72 |
(13ga) | ||||||||
3/4" #9 | 0.923 | 2 | 0.688 | 1.562 | 0.15 | 0.134 | 0.312 | 68 |
(10ga) | ||||||||
1" #16 | 1 | 2.4 | 0.938 | 2.062 | 0.087 | 0.06 | 0.192 | 82 |
1-1/2"#18 | 1.33 | 3 | 1.313 | 2.625 | 0.068 | 0.048 | 0.14 | 90 |
1-1/2"#16 | 1.33 | 3 | 1.25 | 2.625 | 0.108 | 0.06 | 0.23 | 85 |
1-1/2"#13 | 1.33 | 3 | 1.188 | 2.5 | 0.105 | 0.092 | 0.202 | 85 |
1-1/2"#10 | 1.33 | 3 | 1.188 | 2.5 | 0.138 | 0.092 | 0.284 | 80 |
(13ga) | ||||||||
1-1/2"#9 | 1.33 | 3 | 1.125 | 2.375 | 0.144 | 0.134 | 0.312 | 76 |
(10ga) | ||||||||
1-1/2"#6 | 1.33 | 3 | 1 | 2.313 | 0.203 | 0.198 | 0.433 | 69 |
(6ga) | ||||||||
2"#10 | 1.85 | 4 | 1.625 | 3.438 | 0.164 | 0.092 | 0.327 | 82 |
(13ga) | ||||||||
2"#9 | 1.85 | 4 | 1.563 | 3.375 | 0.149 | 0.134 | 0.312 | 84 |
(10ga) | ||||||||
Carbon Steel-Flattened | ||||||||
style | Design | Opening | Size of | Overall | Percent | |||
Size | Size | Strands | Thickness | Open | ||||
(Inches) | (Inches) | in inches | Inches | Area | ||||
SWD | LWD | SWO | LWO | Width | Thickness | |||
1/4"#20 | 0.25 | 1.05 | 0.084 | 0.715 | 0.079 | 0.03 | 0.03 | 35 |
1/4"#18 | 0.25 | 1.05 | 0.075 | 0.715 | 0.08 | 0.04 | 0.04 | 35 |
1/2"#20 | 0.5 | 1.25 | 0.375 | 1 | 0.079 | 0.029 | 0.029 | 65 |
1/2"#18 | 0.5 | 1.25 | 0.312 | 1 | 0.097 | 0.039 | 0.039 | 60 |
1/2"#16 | 0.5 | 1.25 | 0.312 | 1 | 0.096 | 0.05 | 0.05 | 63 |
1/2"#13 | 0.5 | 1.25 | 0.265 | 1 | 0.107 | 0.07 | 0.07 | 52 |
3/4"#16 | 0.923 | 2.1 | 0.75 | 1.75 | 0.111 | 0.048 | 0.048 | 74 |
3/4"#14 | 0.923 | 2.1 | 0.688 | 1.813 | 0.105 | 0.061 | 0.061 | 74 |
3/4"#13 | 0.923 | 2.1 | 0.688 | 1.782 | 0.106 | 0.07 | 0.07 | 74 |
3/4"#10 | 0.923 | 2.1 | 0.637 | 1.755 | 0.16 | 0.07 | 0.07 | 68 |
(13ga) | ||||||||
3/4"#9 | 0.923 | 2.1 | 0.563 | 1.688 | 0.165 | 0.12 | 0.12 | 63 |
(10ga) | ||||||||
1"#16 | 1 | 2.5 | 0.813 | 2.25 | 0.098 | 0.05 | 0.05 | 78 |
1-1/2"#16 | 1.33 | 3.2 | 1.062 | 2.75 | 0.119 | 0.048 | 0.048 | 83 |
1-1/2"#14 | 1.33 | 3.2 | 1.602 | 2.75 | 0.134 | 0.06 | 0.06 | 80 |
1-1/2"#13 | 1.33 | 3.2 | 1.062 | 2.75 | 0.116 | 0.07 | 0.07 | 80 |
1-1/2"#9 | 1.33 | 3.2 | 1 | 2.563 | 0.158 | 0.11 | 0.11 | 75 |
Stainless Steel-Standard | ||||||||
style | Design | Opening | Size of | Overall | Percent | |||
Size | Strands | Strands | Thickness | Open | ||||
(Inches) | (Inches) | in inches | inches | Area | ||||
SWD | LWD | SWO | LWO | Width | Thickness | |||
1/4" #18 | 0.25 | 1 | 0.12 | 0.62 | 0.087 | 0.05 | 0.15 | 30 |
1/2" #18 | 0.5 | 1.2 | 0.437 | 0.937 | 0.087 | 0.05 | 0.164 | 70 |
1/2" #16 | 0.5 | 1.2 | 0.437 | 0.937 | 0.087 | 0.062 | 0.164 | 70 |
1/2" #13 | 0.5 | 1.2 | 0.325 | 0.875 | 0.119 | 0.093 | 0.225 | 70 |
3/4" #18 | 0.923 | 2 | 0.812 | 1.75 | 0.106 | 0.05 | 0.2 | 85 |
3/4" #16 | 0.923 | 2 | 0.812 | 1.75 | 0.106 | 0.062 | 0.202 | 83 |
3/4" #13 | 0.923 | 2 | 0.75 | 1.687 | 0.107 | 0.093 | 0.202 | 80 |
3/4" #9 | 0.923 | 2 | 0.687 | 1.562 | 0.152 | 0.16 | 0.14 | 67 |
(10ga) | ||||||||
1-1/2" | 1.333 | 3 | 1.25 | 2.75 | 0.115 | 0.062 | 0.222 | 85 |
#16 | ||||||||
1-1/2" | 1.33 | 3 | 1.25 | 2.625 | 0.115 | 0.093 | 0.222 | 83 |
#13 | ||||||||
1-1/2"#9 | 1.333 | 3 | 1.125 | 2.5 | 0.144 | 0.134 | 0.312 | 76 |
(10ga) | ||||||||
Stainless Steel-Flattened | ||||||||
style | Design | Opening | Size of | Overall | Percent | |||
Size | Size | Strands | Thickness | Open | ||||
(Inches) | (Inches) | in inches | Inches | Area | ||||
SWD | LWD | SWO | LWO | Width | Thickness | |||
1/4"#18 | 0.25 | 1.2 | 0.08 | 0.66 | 0.09 | 0.047 | 0.047 | 28 |
1/2"#18 | 0.5 | 1.26 | 0.312 | 1 | 0.098 | 0.04 | 0.04 | 60 |
1/2"#16 | 0.5 | 1.26 | 0.312 | 1 | 0.99 | 0.05 | 0.05 | 60 |
1/2"#13 | 0.5 | 1.26 | 0.24 | 0.915 | 0.132 | 0.08 | 0.08 | 57 |
3/4"#18 | 0.923 | 2.1 | 0.75 | 1.812 | 0.118 | 0.04 | 0.04 | 75 |
3/4"#16 | 0.923 | 2.1 | 0.75 | 1.812 | 0.118 | 0.05 | 0.05 | 75 |
3/4"#13 | 0.923 | 2.1 | 0.625 | 1.75 | 0.12 | 0.07 | 0.07 | 75 |
3/4"#9 | 0.923 | 2.1 | 0.562 | 1.687 | 0.15 | 0.119 | 0.119 | 61 |
1-1/2" | 1.33 | 3.15 | 1.062 | 2.75 | 0.128 | 0.05 | 0.05 | 80 |
#16 | ||||||||
1-1/2" | 1.33 | 3.15 | 1 | 2.625 | 0.13 | 0.079 | 0.079 | 80 |
#13 | ||||||||
1-1/2"#9 | 1.33 | 3.15 | 0.937 | 2.625 | 0.165 | 0.119 | 0.119 | 75 |
Aluminum-Standard | ||||||||
style | Design | Opening | Size of | Overall | Percent | |||
Size | Strands | Strands | Thickness | Open | ||||
(Inches) | (Inches) | in inches | inches | Area | ||||
SWD | LWD | SWO | LWO | Width | Thickness | |||
1/2" .051 | 0.5 | 1.2 | 0.375 | 0.937 | 0.093 | 0.051 | 0.158 | 65 |
1/2" .081 | 0.5 | 1.2 | 0.375 | 0.937 | 0.093 | 0.081 | 0.186 | 60 |
3/4" .051 | 0.923 | 2 | 0.813 | 1.175 | 0.109 | 0.051 | 0.2 | 78 |
3/4".081 | 0.923 | 2 | 0.75 | 1.68 | 0.129 | 0.081 | 0.22 | 76 |
(Lt.) | ||||||||
3/4".081 | 0.923 | 2 | 0.75 | 1.68 | 0.165 | 0.081 | 0.3 | 69 |
(Lt.) | ||||||||
3/4".125 | 0.923 | 2 | 0.688 | 1.68 | 0.169 | 0.125 | 0.305 | 68 |
1-1/2".081 | 1.333 | 3 | 1.188 | 2.5 | 0.128 | 0.081 | 0.24 | 85 |
1-1/2".125 | 1.333 | 3 | 1.188 | 2.5 | 0.162 | 0.125 | 0.3 | 79 |
Aluminum-Flattened | ||||||||
style | Design | Opening | Size of | Overall | Percent | |||
Size | Size | Strands | Thickness | Open | ||||
(Inches) | (Inches) | in inches | Inches | Area | ||||
SWD | LWD | SWO | LWO | Width | Thickness | |||
1/2".051 | 0.5 | 1.27 | 0.312 | 1 | 0.104 | 0.04 | 0.04 | 61 |
1/2".081 | 0.5 | 1.27 | 0.312 | 1 | 0.105 | 0.06 | 0.06 | 58 |
3/4".051 | 0.923 | 2.215 | 0.75 | 1.812 | 0.122 | 0.04 | 0.04 | 72 |
3/4".081 | 0.923 | 2.125 | 0.687 | 1.75 | 0.143 | 0.07 | 0.07 | 70 |
(Lt.) | ||||||||
3/4".081 | 0.923 | 2.125 | 0.687 | 1.75 | 0.181 | 0.07 | 0.07 | 63 |
(Hvy) | ||||||||
3/4".125 | 0.923 | 2.125 | 0.625 | 1.75 | 0.187 | 0.095 | 0.095 | 62 |
1-1/2".081 | 1.333 | 3.15 | 1.062 | 2.75 | 0.143 | 0.055 | 0.055 | 77 |
1-1/2".125 | 1.333 | 3.15 | 1 | 2.75 | 0.181 | 0.08 | 0.08 | 70 |
Production Process