A Line Reactor is an electronics component consisting of one or more inductor or transformer elements. The most common type is designed for three-phase electric power, in which three isolated inductors are each wired in series with one of the three line phases. Line reactors are generally installed in HVAC equipment, pumping equipment, machine tools, elevators, printing presses, UPS equipment, computer mainframes, robotics equipment, ski lifts, wind generators, electric cars, cranes, trams, and many other types of equipment, to extend the service life of the VFD and motor.

Model Description:

Input Reactors confirm to the standard as below:

1. IEC289:1987Reactor

2. GB10229-88Reactor(eqvIEC289:1987)

3. JB/T9644-1999 Semiconductor Electrical Drivers Use Reactor

Working Condition

1. Altitude of installation site shall be not exceeding 1000 meters;

2. Ambient temperature: -25°C~40°C;

3. Relative humidity: 85% (at 25°C);

4.Surroundings: It should be installed at indoor without shaking,harmful gas,steam,electric dust and explosion.

Show details

Features

1. All-copper windings, for longer life.

2. Elegant design

3. 50/60 hertz frequency (other frequencies available).

4. Low Noise(less than 60dB)

5. Small volume easy to install and transportation

6. Unique Logo

7. Compliance with IEC289, GB10229

8. Manufactured under ISO 9001 quality management

Functions

1. The output reactor is able to extend the lifetime of output motor.

2. It can also dampen overshoot peak voltage.

3. The low voltage reactor is used to reduce motor heating and audible noise.