Straightening machine:

    Series JY straightening machine is mainly used forprecision straightening for the metal bar after peelingor granding and pre-straightening  for the metal bar.

    The machine adopted special  curve between upper concave and the lower convex two straightening rolls to realize calendering and straightening at the same time,which greatly improved the working efficiency.  Series JY two-rolls Straightening Machine consists of two-beams and four-columns structure,prestressed structure and frame structure.

Characteristics

1,fast feeding and straightening speed,which can reach 10-30m/min.

2,with special carves ,it can straighten and calender materials at the same time.

3,highe precision.straighteness can be 0.15-0.4mm/m,surface roughness Ra≤0.8μm.

The most vital part of a straightener is the two

straightening rollers, which desigined by our qualified engineers.The up roller is concaveand the lower one is convex,which formed a special curve to press strongly onto thematerials to realize straightening,as well as straightening.

Main Machine

   The upper and lower body respectively

install a straightening roller,the upper roller is concave ,the lower roller is convex.

   According to the diameter and the material properties of the bar,respectively to adjust upper and lower straightening roller angle,electric lift part adjust the gap between the two straightening rolls,start the cooling lubrication system,driven by main motor,to complete calendering and straightening at the same time. Frequency conversion stepless speed,realtime display the gap between upper roll and lower roll.Guide sleeves are installed in the inlet and outlet.Its location can be adjusted,playing guide and support role.During processing,the bar can accurately enter and leace the straightening rolls.

CHARACTER: 

    JY Series of straightening machine can realized precise straightening and polishing on the after peeling or grinding metal bar surface utilizing the special curves and angles between the top and bottom two rollers. It can be used in black bar material straightening as well.
There are 3 types of structure in straightening machine, two beam four column structure, prestressed structure and frame structure.The straightness can be up to 0.15——0.4mm/m , and the roughness Ra<1μm after straightening.

straightening roller:

For two-rolls straightening machine, the bending moment of raw material is realized by concave roll. Another advantage is that the angle between rolls angle and rod axis is small, whiche is 15^°. So the screw pitch of envelop line is shorter, and its straightness accuracy is higher.

Application: It could be used for bright bar , and black bar with suitable bending and surface hardness .Its straightening speed is slower than multi-rolls straightener, but its straightness accuracy is higher ,and its cost is lower.

     Our machines has been used in the preparation procedure of the following mechanical equipments manufacturing,such as slender shaft, hydraulic pneumatic components, bearings, springs, auto parts, textile machinery, cold forging  material processing, instrumentation, steel pipe, cutting tools, engineering machinery, sports equipment etc.. They can also be widely used in copper, titanium, aluminum, magnesium industry, petroleum, electric power, Bridges and other industries, for example, piston rod, optical axis, bolt, spring, gear rack, toothed bar, stainless steel bars, copper bars, titanium bars, aluminum bars, magnesium bars, bearing ring, tiebar roller pin, pin , light bars, screw, mandrel, petroleum- drill pipe, steel cable, pipe billet, etc. 

    We have exported to the following countries: Europe and the United States, Russia, Belarus, Pakistan, South Korea, North Korea, India, Vietnam, Taiwan, South Africa, Brazil, Thailand, etc.

    We have rich experience in export packaging with professional packaging and professional packing staff. Multilayer packaging is adopted with critical area wrapped with moisture proof and shock proof film, plywood box, or wood box and tray. Multiple reinforcement measures is applied to ensure the solid fixation of equipment on packing box and tray, and the stability of equipment in the container.

• The first layer: wrapped with foam film and stretch film for the special components for the sake of avoiding moisture.
• Second layer: adopting small square plywood block and strapping belt to fix the machine inside the plywood box
  
• Third layer: the machine itself has screw fixing holes, so it can be tightly fixed on the bottom of the plywood box through screw and nut.
• Fourth layer: inside the container, the gap between machine parts are filled with compact layout to avoid shaking. At the same time, reinforcing between the bottom of the container and plywood boxes once again, furthermore using hanging steel wire protection.

 

If you have any questions, please feel free to contact us at the following: