wire rod peeling machine, buy cnc machines price peeling black structural steel bar tools on China Suppliers Mobile

Product Details

Detailed Description

Introduction of Series WXC Centerless Lathe

Series WXC Centerless Lathe is a high-efficiency lathe which is specialized in rough processing and finishing of the surface of slender shaft. Not only quickly remove surface hardened layer,cracks and other defects,but also can get high precision.

During processing,the bar itself doesn’t rotate.The cutter head drives the tools rotating at high speed to peel the surface bar.At the same time,after peeling,the bar keeps walking straight ahead.The machine suits for processing the bars and wire rods.

Series WXC Centerless Lathe,includes semi-automatic hydraulic type and CNC type.

Specification		WXC100S
RAW MATERIALS	DiameterRange(mm)	Φ25~Φ100
	Raw Material Length(mm)	≥3000
	Tensile Strength (Mpa)	≤1100
	Surface Hardness	≤HB320
	Curvature(mm/m)	≤1.50
	Diameter Tolerance	According to GB 702-2004 second group
	Roundness(mm)	≤50% of the diameter tolerance
	Surface Roughness(Ra)	≤25~50mm
FINISHED GOODS	DiameterRange	Φ24~Φ98
	Unilateral Cutting Depth (mm)	0.5~2
	Diameter Tolerance	≤IT9(standard tolerance grade)
	Surface Roughness(Ra)	≤6.3μm
	Roundness(mm)	≤0.04
Feeding Cutting Speed(m/min)		0.5~5(for continuous chips and high strength and hardness should reduce the speed)
Cutter Head Rotational Speed(rpm)		240~670(Six Poles)
Host Machine Motor Power(KW)		90
Auxiliary Machine Motor Power(KW)		7.5(clamping and feeding)+7.5(Carriage)
Host Machine Outline Dimensions (LengthWidthHeight) m		4.4m X 3.0m X 2.5m
Full Set Machine Outline Dimensions (including auxiliary machine) (LengthWidthHeight) m		16m X 3.2m X 2.2m
Host Machine Weight (including auxiliary weight) (T)		13.5 ( 20.2)
Total Capacity(KW)		130
Compressed Air Source (user prepare by themselves)		0.5-0.8Mpa,1.8m³/min,0.8m³ gasholder,two-stage oil-water separator and compressed air freezing drier.

Introduction of Straightening machine

Series JY straightening machine ,this machine is mainly used for

precision straightening and calendering for the bar after peeling or grinding and rough pre-straightening for the black bar.

Due to calendering and straightening can be completed at the same time, so the working efficiency is high.

The machine adopts special curve between upper and lower concave and convex two straightening rolls to realize calendering and straightening at the same time.

Series JY two-rolls Straightening Machine, includes two-beams and four-columns structure, prestressed structure and frame structure.

Specification		JY100Z
Raw Material	Diameter Range(mm) (excluding drawing material)	Tensile Strength σb≤450(M pa)		Φ25≤d≤Φ100(L ≥3000)
		Tensile Strength σb≤1000(M pa)		Φ25≤d≤Φ90(L ≥3000)
	Surface Hardness	≤HB380(≤HRC42)
	Straightness(mm/m)	≤3
	Diameter Tolerance	≤IT10
	Circular Degree	d≤50	≤50% of diameter tolerance
		50<d≤80	≤65% of diameter tolerance
		d>80	≤70% of diameter tolerance
	Surface Roughness(Ra)	≤3.2~6.3mm
Finished Goods	Straightness(mm/m)	≤0.40
	Diameter Tolerance	≤IT8
	Surface Roughness(Ra)	≤0.8μm
Roller Quantity (Pcs)		2
Roller Diameter (mm)		Φ380
Straightening Feeding Speed(m/min)		2~12(infinitely adjustable-speed)
Host Machine Motor Power (KW)		75X2
Lifting Motor Power (KW)		4
Host Machine Outline Dimensions (LengthWidthHeight)		8.1mX3.1mX3.6m
Weight		26.2T
Total Capacity KW		170
Compressed Air Source (user prepare by themselves)		0.5~0.8MPa,1.8m3/min,two-stage oil-water separator

About us

Yantai Haige International Trading Co.,Ltd., is a joint-stock enterprise engaged in exporting niche mechanical equipments produced in China to the markets abroad, which is located in Laishan district, Yantai City, Shandong Province, China.

The company is based on the manufacturing plant---Yantai Haige machine tools Co.,Ltd.

So far, the company has produced and sold more than 1500 sets of equipments.The machines are mainly used to process the surface of the steel, copper, titanium, magnesium, aluminum and other metal round bars, pipes and wire from Φ5mm~Φ500mm. The peeling machine, straightening machine and polishing machine can be combined into automatic production lines for processing and finishing of the bright steel which remove cracks, oxide layer, decarburized layer and other defects from the bar surface quickly. High quality bright bars, pipes and wire can be produced with high precision and high surface roughness whose working efficiency is several even more than ten times higher than that of the traditional technique.Our company is capable of supplying automatic production line in full sets by expanding varieties of the niche mechanical equipments.

After-sale service

1.Free quality guarantee period for 12 months

2.Free provide long-term technical support

3.Free train buyer's operator in seller's factory

4.Fast responce service within 24 hours

5.Our engineers can offer overseas service,including guiding

installation,commissioning,training,etc.

Packaging

More information,please contact me!Hope that we can create a win-win opportunity.