wire rod peeling machine, buy high speed high precision peeling machine on China Suppliers Mobile

Product Details

Product Overviews

Description

Series WXC centerless lathe is a high-efficient lathe which is specialized in rough processing and finishing of the surface of slender shaft.Not only quickly remove surface hardened layer,cracks and other defects,but also can get high precision.

During processing,the bar itself doesn't rotate.The cutter head drives the tools rotating at high speed to peelingthe surface of the bar.At the same time,after peeling,the bar keeps walking straight ahead.The machine suits for processing the bars and wire rods.

Series WXC Centerless lathe, includes semi-automatic hydraulic type and CNC type.

Applications

1. Ferrous metals:

Stainless steel, bearing steel, spring steel, tool steel, structural steel, alloy steel, free-cutting steel, air valve steel, gear steel. etc.

2. Nonferrous metals:
Copper alloy, titanium alloy, magnesium alloy, aluminum alloy, etc. Widespread in preparation link in manufacturing of slender axles, hydraulic/pneumatic elements, bearings, springs, auto parts, textile machinery, processing of cold forging materials, instruments, steel pipes, cutters, engineering machinery, sports equipment and other machiner.

3.Widely applied to industries of copper, titanium, aluminum, magnesium, petroleum, power and bridge

(e.g. piston rod, optical axis, bolt, spring, rack, rod thread, stainless steel rod, copper rod, titanium rod, aluminum rod, magnesium rod, bearing ring, draglink, roller shaft, pin, polishing rod, screw, core rod, oil drill pipe, tightwire, pipe blank).

Processing Flow

Advantages

1. Centerless lathe has incomparable advantages in processing over-length bar.In theory,it can proces the bar of infinite length.

2.It can also process rod,or turning rod into bars.

4. The precessing speed: 1~12m/min which is several times faster than the general lathe.

5. High precision. The diameter tolerance ≤IT9 while the surface roughness ≤6.3μm after peeling.The surface roughness can be less than 0.8μm if our straightening machines are used afterward.

Specification		WXC40C
Raw Material	Diameter Range (mm)	Φ6~Φ40
	Raw Material Length (mm)	≥1400
	Tensile Strength (M pa)	≤1100
	Surface Hardness	≤HB320
	Curvature (mm/m)	≤1.5
	Diameter Tolerance	according to GB 702-2004 second group
	Roundness(mm)	≤50% of diameter tolerance
	Surface Roughness (Ra)	≤25~50mm
Finished Goods	Diameter Range (mm)	Φ5.5~Φ39
	Unilateral Cutting Depth (mm)	0.2~0.5
	Diameter Tolerance	≤IT9 (standard tolerance grade)
	Surface Roughness (Ra)	≤6.3μm
	Roundness (mm)	≤0.03
Feeding Cutting Speed (m/min)		1.0~8.0(for continuous chips and high strength and hardness should reduce the speed)
Cutter Head Rotational Speed(rpm)		900-2500
Main Machine Motor Power (KW)		45 (2 Poles)
Auxiliary Machine Motor Power(KW)		4 X 2(4 Poles)
Main Machine Outline Dimensions (LengthWidthHeight) m		2.0mX2.2mX1.5m
Full Set Machine Outline Dimensions (Including auxiliary machine) m		12.0mX2.2mX1.5m
Main Machine Weight (including auxiliary weight) (T)		3.3 (4.5)
Total Capacity(KW)		65KW
Compressed Air Source(user prepare by themselves)		0.5~0.8MPa,1.8m3/min,more than 0.8 m3 gasholder, two-stage oil-water separator and compressed air freezing drier