steel tube peeling machine, buy cnc lathe turning round bars machine tools on China Suppliers Mobile

Product Details

CNC lathe turning round bars machine tools

Main Technical Parameters of WXC130S

MODEL		WXC130S
RAW MATERIALS	Diameter Range(mm)	Φ45~Φ130
	Raw Material Length(mm)	≥2800
	Tensile Strength(Mpa)	≤1100
	Surface Hardness	≤HB320
	Curvature(mm/m)	≤1.50
	Diameter Tolerance	According to GB 702-2004 second group
	Roundness(mm)	≤50% of the diameter tolerance
	Surface Roughness(Ra)	≤25-50μm
FINISHED GOODS	Diameter Range	Φ44~Φ129
	Unilateral Turning Depth (mm)	1~2.5
	Diameter Tolerance	≤IT9 (standard tolerance grade)
	Surface Roughness(Ra)	≤12.5μm
	Curvature(mm/m)	≤1.5
	Roundness(mm)	≤0.03
Feeding Cutting Speed(m/min)	0.8-1.5 (for continuous chips and high strength and hardness should reduce the cutting speed)
Cutter Head Rotational Speed(rpm)	240-670 (Six poles) 360-1000 (Four poles)
Main Machine Motor Power(KW)	110
Auxiliary Machine Motor Power(KW)	11(feeding part)
Main Machine Outline Dimensions (LengthWidthHeight) m	5.3 X 3.5 X 3
Full Set Machine Outline Dimensions (Including auxiliary) (LengthWidthHeight) m	18M X 3.5M X 3M
Main Machine Weight (including auxiliary weight) (t)	20.5 (29)
Total Installed Capacity(KW)	130
Compressed Air Source (users prepare by themselves)	0.5~0.8MPa,1.8m³/min,more than 0.8 m³gasholder, two-stage oil-water separator and compressed air freezing drier

peeling description

Series WXC Centerless Lathe includes Semi-automatic hydraulic and CNC type.

The machine’s features are as follows:

When processing over-length bar,centerless lathe has incomparable advantages.
Centerless Lathe is not only processing Bar,also Wire Rod.
Processing speed 1~12m/min,the working efficiency of centerless lathe is dozens of times of the ordinary lathe.
High Precision,after peeling,diameter tolerance can reach ≤h9,surface roughness(Ra)≤6.3μm.

Semi-automatic Hydraulic Peeling Machine

CNC Bar Peeling Machine

During processing,the bar itself doesn’t rotate.The cutter head drives the tools rotating at high speed to peel the surface of the bar.After peeling,the bar keeps walking straight ahead.

Company Information

Factory Introduction

Yantai Haige Machine Tools Co.,Ltd. was built in 1997,which is mainly producing series WXC Centerless Lathe(Bar Peeling Machine),Series JY Bar Straightening Machine,Abrasive Belt Grinder (Belt Sander Polishing Machine) and auxiliary machine,etc.

We regard Customer’s Satisfaction as our unremitting pursuit.

Based on more than ten years manufacturer and design experience,our machine have been exported to Russia,Vietnam,India,Korea and other countries and regions.

Factory real landscape

Processing Machinery

Accessories Area

Administrative Area

Contact

Any questions,please feel free to contact me.I will give you soon reply.

Related Products---------Abrasive Belt Sander Polishing Machine,which can constitute production line to improve working speed and surface roughness,etc.(YM350SA as an example)

Abrasive Belt Sander

Abrasive Belt Sander Polishing Machine

Abrasive belt grinder is specialized in grinding the surface of the bars and it can improve the surface precision of the bars.

Technical Parameters of Abrasive Belt Grinder--YM350SA

Specification		YM350SA
Requirements before grinding	Diameter range(mm)	Φ160-Φ350
	Length required(mm)	≥3000
	Yield strength σ_b(Mpa)	≤1400
	Surface hardness	≤HRC60
	Curvature(mm/m)	≤1.50
	Diameter tolerance	≤IT10
	Roundness	≤50% of diameter tolerance
	Surface roughness(Ra)	≤3.2μm
After grinding	Diameter range(mm)	Φ155-Φ350
	Amount of grinding(mm)	0-100μm
	Diameter tolerance	≤IT10
	Surface roughness(Ra)	≤0.5μm
Feeding speed(stepless speed)(m/min)		0.75-1.5
Belt reel speed(r/min)		40r/min(24-48r)
Main motor power(kw)		30kw
Feeding motor power(kw)		3kw×2 (stepless speed)
Dimension of main machine(m)		8m×3m×2m
Total capacity(kw)		45kw
Roller diameter(mm)		Φ310
Roller motor power(kw)		2.2kw×2
Lifting motor power(kw)		2.2kw×2
Wet dust removal motor power(kw)		0.45
Hydraulic station motor power		2.2kw
Running noise		≤75dB