steel tube peeling machine, buy Professional peeling mill for round steel bars on China Suppliers Mobile

Product Details

Professional peeling mill for round steel bars

Product Description

Series WXC centerless lathe is the high-efficiency lathe which is specialized in rough

and precise processing of the metal bars surface. It removes the decarburized layer,

cracks and other defects from the surface of the bars with high precision.In the working

process, the metal bar doesn’t rotate and just walks forward. The cutter tools are driven to

rotate by the cutter head to rotate fastly to peel the surface of the bars.

Advantages compared with the general lathe

1. The over-long metal bars or the wire rods can also be processed.

2. The precessing speed: 1~12m/min which is several times faster than the general lathe.

3. High precision. The diameter tolerance ≤IT9 while the surface roughness ≤6.3μm after peeling.

The surface roughness can be less than 0.8μm if our straightening machines are used afterward.

Applications

1. Ferrous metals:

Stainless steel, bearing steel, spring steel, tool steel, structural steel, alloy steel, free-cutting steel, air valve steel, gear steel, others;

2. Nonferrous metals:

Copper alloy, titanium alloy, magnesium alloy, aluminum alloy, etc. Widespread in preparation link in manufacturing of slender axles, hydraulic/pneumatic elements, bearings, springs, auto parts, textile machinery, processing of cold forging materials, instruments, steel pipes, cutters, engineering machinery, sports equipment and other machiner.

3.Widely applied to industries of copper, titanium, aluminum, magnesium, petroleum, power and bridge

(e.g. piston rod, optical axis, bolt, spring, rack, rod thread, stainless steel rod, copper rod, titanium rod, aluminum rod, magnesium rod, bearing ring, draglink, roller shaft, pin, polishing rod, screw, core rod, oil drill pipe, tightwire, pipe blank).

Technical Parameters

Specification		WXC80S
Before Peeling	Diameter Range(mm)	Φ21~Φ85
	Raw Material Length(mm)	≥2200
	Tensile Strength (M pa)	≤1100
	Surface Hardness	≤HB320
	Curvature(mm/m)	≤1.50
	Diameter Tolerance	According to GB 702-88 second group
	Roundness	≤50% of the diameter tolerance
	Surface Roughness(Ra)	≤25~50μm
After Peeling	Diameter Range	Φ20~Φ80
	Unilateral Cutting Depth (mm)	0.35~1.50
	Diameter Tolerance	≤IT9
	Surface Roughness(Ra)	≤3.2μm
	Roundness	≤0.3mm
Feeding Cutting Speed(m/min)	1.0-10.0 (reduce feed speed for continuous chips materials)
Cutter Head Rotational Speed(rpm)	290~800 (Six Poles)
Main Machine Motor(KW)	75
Main Machine Size *(LengthWidthHeight)*	3.5m X 3.5m X 2.4m
Main Machine Weight (T)	8.5
Total Capacity(KW)	95
Compressed Air Supply	0.5-0.8Mpa,1.8m³/min,0.8m³ gasholder,two-stage oil- water separator and compressed air freezing drier