Product Details

Product Description

New WXC30C Turning Lathes Machine

Main Technical Parameters

Specification		WXC30C
Raw Material	Diameter Range (mm)	Φ6~Φ32
	Raw Material Length (mm)	≥1400
	Tensile Strength (M pa)	≤1100
	Surface Hardness	≤HB320
	Curvature (mm/m)	≤1.5
	Diameter Tolerance	according to GB 702-88 second group
	Roundness(mm)	≤50% of diameter tolerance
	Surface Roughness (Ra)	≤25~50mm
Finished Goods	Diameter Range (mm)	Φ5.5~Φ30
	Unilateral Cutting Depth (mm)	0.2~1.0
	Diameter Tolerance	≤IT9 (standard tolerance grade)
	Surface Roughness (Ra)	≤6.3μm
	Roundness (mm)	≤0.03
Feeding Cutting Speed (m/min)		1.0~8.0(for continuous chips and high strength and hardness should reduce the speed)
Cutter Head Rotational Speed(rpm)		900-2500
Main Machine Motor Power (KW)		30 (2 Poles)
Auxiliary Machine Motor Power(KW)		4 X 2(4 Poles)
Main Machine Outline Dimensions *(LengthWidthHeight) m*		2.0mX2.2mX1.5m (for your reference)
Full Set Machine Outline Dimensions (Including auxiliary machine) m		12.0mX2.2mX1.5m (for your reference)
Main Machine Weight (including auxiliary weight) (T)		3.3 (4.5)
Total Capacity(KW)		65KW
Compressed Air Source(user prepare by themselves)		0.5~0.8MPa,1.8m³/min,more than 0.8 m3 gasholder, two-stage oil-water separator and compressed air freezing drier

Product Description

Series WXC centerless lathe is the high efficiency lathe which is specialized in rough and

precise processing of the metal bars surface. It removes the decarburized layer, cracks and other

defects from the surface of the bars with high precision.In the working process, the metal

bar doesn’t rotate and just walks forward. The cutter tools are driven to rotate by the cutter head

to rotate fastly to peel the surface of the bars.

Advantages compared with the general lathe

1. The over-long metal bars or the wire rods can also be processed.

2. The precessing speed: 1~12m/min which is several times faster than the general lathe.

3. High precision. The diameter tolerance ≤IT9 while the surface roughness ≤6.3μm after peeling.

The surface roughness can be less than 0.8μm if our straightening machines are used afterward.

Applications

1. Ferrous metals:

Stainless steel, bearing steel, spring steel, tool steel, structural steel, alloy steel, free-cutting steel, air valve steel, gear steel, others;

2. Nonferrous metals:

Copper alloy, titanium alloy, magnesium alloy, aluminum alloy, etc. Widespread in preparation link in manufacturing of slender axles, hydraulic/pneumatic elements, bearings, springs, auto parts, textile machinery, processing of cold forging materials, instruments, steel pipes, cutters, engineering machinery, sports equipment and other machiner.

3.Widely applied to industries of copper, titanium, aluminum, magnesium, petroleum, power and bridge

(e.g. piston rod, optical axis, bolt, spring, rack, rod thread, stainless steel rod, copper rod, titanium rod, aluminum rod, magnesium rod, bearing ring, draglink, roller shaft, pin, polishing rod, screw, core rod, oil drill pipe, tightwire, pipe blank).

Process