Steel bar peeling machine, buy New JY100 Two-roll straightening machine on China Suppliers Mobile

Product Details

New JY100 Two-roll straightening machine

Product Overviews

It is mainly used for straightening and calendering various metal bar after peeling or grinding.It is also used in the rough pre-straightening for the black bars with the hydraulic protection devices.

The special curve between the upper concave and the lower convex of the two straightening rolls can easily realiize calendering while straightening.

Two-rolls Straightening Machine includes four-pillar structure, four-beams structure,prestressed structure and frame structure as follows.

Specification		JY100
Raw Material	Diameter Range(mm) (excluding drawing material)	Tensile Strength σ_b≤450(M pa)		Φ25≤d≤Φ100(L ≥3000)
		Tensile Strength σ_b≤1000(M pa)		Φ25≤d≤Φ90(L ≥3000)
	Surface Hardness	≤HB380(≤HRC42)
	Straightness(mm/m)	Bright Steel≤3 Black Material≤4
	Diameter Tolerance	Bright Steel≤IT10Black Material d-2-GB/T702-2004
	Circular Degree	d≤50	≤50% of diameter tolerance
		50<d≤80	≤65% of diameter tolerance
		d>80	≤70% of diameter tolerance
	Diameter Range(mm) (excluding drawing material)	Bright Steel≤3.2mm~6.3mm
Finished Products	Straightness(mm/m)	Bright Steel≤0.40 Black Material≤1.0
	Diameter Tolerance	Bright Steel≤IT8 Black Material:Much better than raw material
	Surface Roughness(Ra)	Bright Steel≤0.8μm Black Material:Much better than raw material
Roller Quantity (Pcs)		2
Roller Diameter (mm)		Φ380
Straightening Feeding Speed(m/min)		2~12
Main Machine Motor Power (KW)		75 X 2
Lifting Motor Power (KW)		4
Outline Dimensions (LengthWidthHeight) (for your reference)		Full Set (including auxiliary machine) 15.8mX5.5Mx4.6m
Weight(for your reference)		Main Machine 26T Full Set(including auxiliary machine) 32T
Total Capacity(for your reference)KW		170KW
Compressed Air Source(user prepare by themselves)		0.5~0.8MPa,3m³/min,two-stage oil-water separator