Steel bar peeling machine, buy WXC80S peeling machine for steel round bars on China Suppliers Mobile

Product Details

Product Description

Series WXC Centerless Lathe is a high-efficiency lathe which is specialized in rough processing and finishing of the surface of slender shaft. Not only quickly remove surface hardened layer, cracks and other defects, but also can get high precision.

WXC80S steel round bar peeling machine

Specification		WXC40S
RAW MATERIALS	Diameter Range(mm)	Φ10~Φ40
	Raw Material Length(mm)	≥1400
	Tensile Strength (M pa)	≤1100
	Surface Hardness	≤HB320
	Curvature(mm/m)	≤1.5
	Diameter Tolerance	according to GB 702-2004 second group
	Roundness	≤50% of the diameter tolerance
	Surface Roughness(Ra)	≤25˜50um
FINISHED GOODS	Diameter Range	Φ9.5~Φ39
	Unilateral Cutting Depth(mm)	0.2~0.5
	Diameter Tolerance	≤IT9(standard tolerance grade)
	Surface Roughness(Ra)	≤6.3μm
	Roundness	≤0.03
Feeding Cutting Speed(m/min)	1.0~10.0(for continuous chips and high strength and hardness should reduce the speed
Cutter Head Rotational Speed(rpm)	450˜1250
Main Machine Motor Power(KW)	45 (4 Poles)
Auxiliary Machine Motor Power(KW)	4(feeding part)+0.55((discharging part) 4 Poles
Main Machine Outline Dimensions (LengthWidthHeight) m	2.5mX2.2mX1.5m (only for reference)
Full Set Machine Outline Dimensions (including auxiliary machine) (LengthWidthHeight) m	12.5mX2.2mX1.5m (only for reference)
Main Machine Weight (including auxiliary weight)(T)	3.5(6.0) (only for reference)
Total Capacity (KW)	56(only for reference)
Compressed Air Source(user prepare by themselves)	0.5~0.8MPa,1.8m³/min,more than 0.8 m3 gasholder, two-stage oil-water separator and compressed air freezing drier

Advantages

1. Green, with no environmental harm.

2. Surface of finished goods possesses better brightness.

3. Faster turning and straightening, and higher working efficiency.

4. Have unique advantages in processing over-long bars

(including infinitely long coiled raw materials).

5. Operation is simple, reducing labor cost and enhancing profit.

6. All of the metal shavings of turning can be recycled and resold,

reducing cost and enhancing profit once again.

Features

practical; stable processing; highly speed; high efficiency; better surface quality. Online adjusting tool holders. Full-automatic online loop-locked control of material diameter can be achieved if more control points are added. The whole line of the equipment owns high degree of automation. Turning speed of materials can reach 1-12m/min. The equipment possesses automatic and manual control systems, and the two systems can be interlocked in usage.

Company Information

Yantai Haige Machine Tools Co., Ltd (original Yantai Ruihai Machinery Co., Ltd) establishes in 1999 and is a professional company engaged in producing finishing equipment and processing equipment of bright material.

The company is equipped with specialized technical research and development department, and its ability of research and development, configuration of software and hardware and scale of personnel rank first in the industry.

Contact