polishing machine, buy Low Cost CNC Metal Bar Grinder from China on China Suppliers Mobile

Product Details

Peeler details

Yantai Haige Machine Tools Co.,Ltd

----Professional Manufacturer of Centerless Lathe &Straightening Machine

Yantai Haige Machine Tools Co.,Ltd. was built in 1997,which is mainly producing series WXC Centerless Lathe(Bar Peeling Machine),Series JY Bar Straightening Machine,Abrasive Belt Grinder (Belt Sander Polishing

Machine) and auxiliary machine,etc.

We regard Customer’s Satisfaction as our unremitting pursuit.

Based on more than ten years manufacturer and design experience,our machine have been exported to Russia,

Vietnam,India,Korea and other countries and regions.

Haige Machine Tools Co.,Ltd. Unique After-sale Service

1.Our engineers can offer overseas service,including guiding installation,commissioning,etc.

2.Free quality guarantee period for 1 year except for vulnerable parts

3.Free provide long-term technical support

4.Free train buyer’s operator in seller’s factory

Main Technical Parameters of WXC160S

MODEL		WXC160S
RAW MATERIALS	Diameter Range(mm)	Φ50~Φ160
	Raw Material Length(mm)	≥4000
	Tensile Strength(Mpa)	≤1100
	Surface Hardness	≤HB320
	Curvature(mm/m)	≤1.50
	Diameter Tolerance	According to GB 702-2004 second group
	Roundness(mm)	≤50% of the diameter tolerance
	Surface Roughness(Ra)	≤25-50μm
FINISHED GOODS	Diameter Range	Φ49~Φ155
	Unilateral Turning Depth (mm)	0.5~2.50
	Diameter Tolerance	≤IT10 (standard tolerance grade)
	Surface Roughness(Ra)	≤6.3μm
	Roundness(mm)	≤0.05
Feeding Cutting Speed(m/min)	0.5-3 (for continuous chips and high strength and hardness should reduce the cutting speed)
Cutter Head Rotational Speed(rpm)	60~800
Host Machine Motor Power(KW)	160
Auxiliary Machine Motor Power(KW)	15
Host Machine Outline Dimensions (LengthWidthHeight) m	5.5m * 3m * 2.5m
Full Set Machine Outline Dimensions (Including auxiliary) (LengthWidthHeight) m	18m X 3.5m X 3m
Host Machine Weight (including auxiliary weight) (t)	30 (20)
Total Installed Capacity(KW)	210
Compressed Air Source (users prepare by themselves)	0.5~0.8MPa,1.8m3/min,more than 0.8 m3 gasholder, two-stage oil-water separator and compressed air freezing drier

Series WXC Centerless Lathe includes Semi-automatic hydraulic and CNC type.

The machine’s features are as follows:

1.When processing over-length bar,centerless lathe has incomparable advantages.

2.Centerless Lathe is not only processing Bar,also Wire Rod.

3.Processing speed 1~12m/min,the working efficiency of centerless lathe is dozens of times of the ordinary lathe.

4.High Precision,after peeling,diameter tolerance can reach ≤IT9,surface roughness(Ra)≤6.3μm.

During processing,the bar itself doesn’t rotate.The cutter head drives the tools rotating at high speed to peel the

surface of the bar.After peeling,the bar keeps walking straight ahead.

Main Technical Parameters for your reference

List of Main Technical Parameters of Centerless Lathe

Main Parts of Series WXC Bar Peeling Machine

1.Main machine consists of the bed,main bearings,ail/oil lubrication system,

front-clamping pinch feeding and rear-clamping extracting,front-guide and

middle-rear guide system,main driving system etc.

2.Air/oil lubrication system is specially designed to solve the lubrication of main shaft

bearings with highspeed rotation.It’s composed of pump,oil and air distribution block

and air processing components.

3.Cutting liquid circulation cooling system consist of recycle water pump,pipeline,

nozzle etc.

4.High pressure water pump takes the cutting liquid cooled from reservoir through

pipeline transporting the near to the nozzle of cutter head,until spraying on the

tools and scraps.Then take away most the cutting heat and enter into chip conveyor

mouth of the bottom of cutter head,through the pipeline reflow reservoir for cooling.

5.Chip conveyor is provided by our supplier.The scraps through chip conveyor mouth

to be taken to the chain plate and driving belt move with the scraps.Finally,the scraps

are centralized collection.

6.Hydraulic system consists of pump set of motor,all kinds of control valves,hydraulic

oil tank,hydraulic pipeline etc.Though controlling the cylinders of front-clamping pinch

feeding and rear clamping extracting to realize clamping and loosening for the bar.

7.Electrical system includes power supply system and control system,by 1 power distribution

cabinet and 1 button station integrated operation,implement pinch before and after the main

transmission system,feeding system,cooling system,hydraulic system,the electrical control

of chip conveyor and auxiliary machine.

Export Packaging

Our Customers

Contact

Name	Lucy
Factory	Yantai Haige Machine Tools Co.,Ltd.Shandong Province,China
Mobile/Whatsapp	+86-18663867057
Tel/Fax	+86-535-6726618/+86-535-6896668
Email