CNC Skiving&Roller Burnishing Machine, buy cylinder bore skiving machine on China Suppliers Mobile

Product Details

Detailed Description

Introduction of Series WXC Centerless Lathe

Series WXC Centerless Lathe is a high-efficiency lathe which is specialized in rough processing and finishing of the surface of slender shaft. Not only quickly remove surface hardened layer,cracks and other defects,but also can get high precision.

During processing,the bar itself doesn’t rotate.The cutter head drives the tools rotating at high speed to peel the surface bar.At the same time,after peeling,the bar keeps walking straight ahead.The machine suits for processing the bars and wire rods.

Series WXC Centerless Lathe,includes semi-automatic hydraulic type and CNC type.

Specification		WXC100S
RAW MATERIALS	DiameterRange(mm)	Φ25~Φ100
	Raw Material Length(mm)	≥3000
	Tensile Strength (Mpa)	≤1100
	Surface Hardness	≤HB320
	Curvature(mm/m)	≤1.50
	Diameter Tolerance	According to GB 702-2004 second group
	Roundness(mm)	≤50% of the diameter tolerance
	Surface Roughness(Ra)	≤25~50mm
FINISHED GOODS	DiameterRange	Φ24~Φ98
	Unilateral Cutting Depth (mm)	0.5~2
	Diameter Tolerance	≤IT9(standard tolerance grade)
	Surface Roughness(Ra)	≤6.3μm
	Roundness(mm)	≤0.04
Feeding Cutting Speed(m/min)		0.5~5(for continuous chips and high strength and hardness should reduce the speed)
Cutter Head Rotational Speed(rpm)		240~670(Six Poles)
Host Machine Motor Power(KW)		90
Auxiliary Machine Motor Power(KW)		7.5(clamping and feeding)+7.5(Carriage)
Host Machine Outline Dimensions (LengthWidthHeight) m		4.4m X 3.0m X 2.5m
Full Set Machine Outline Dimensions (including auxiliary machine) (LengthWidthHeight) m		16m X 3.2m X 2.2m
Host Machine Weight (including auxiliary weight) (T)		13.5 ( 20.2)
Total Capacity(KW)		130
Compressed Air Source (user prepare by themselves)		0.5-0.8Mpa,1.8m³/min,0.8m³ gasholder,two-stage oil-water separator and compressed air freezing drier.

Product Overviews

Description

Series WXC centerless lathe is a high-efficient lathe which is specialized in rough processing and finishing of the surface of slender shaft.Not only quickly remove surface hardened layer,cracks and other defects,but also can get high precision.

During processing,the bar itself doesn't rotate.The cutter head drives the tools rotating at high speed to peelingthe surface of the bar.At the same time,after peeling,the bar keeps walking straight ahead.The machine suits for processing the bars and wire rods.

Series WXC Centerless lathe, includes semi-automatic hydraulic type and CNC type.

Applications

1. Ferrous metals:

Stainless steel, bearing steel, spring steel, tool steel, structural steel, alloy steel, free-cutting steel, air valve steel, gear steel. etc.

2. Nonferrous metals:
Copper alloy, titanium alloy, magnesium alloy, aluminum alloy, etc. Widespread in preparation link in manufacturing of slender axles, hydraulic/pneumatic elements, bearings, springs, auto parts, textile machinery, processing of cold forging materials, instruments, steel pipes, cutters, engineering machinery, sports equipment and other machiner.

3.Widely applied to industries of copper, titanium, aluminum, magnesium, petroleum, power and bridge

(e.g. piston rod, optical axis, bolt, spring, rack, rod thread, stainless steel rod, copper rod, titanium rod, aluminum rod, magnesium rod, bearing ring, draglink, roller shaft, pin, polishing rod, screw, core rod, oil drill pipe, tightwire, pipe blank).

Processing Flow

Advantages

1. Centerless lathe has incomparable advantages in processing over-length bar.In theory,it can proces the bar of infinite length.

2.It can also process rod,or turning rod into bars.

4. The precessing speed: 1~12m/min which is several times faster than the general lathe.

5. High precision. The diameter tolerance ≤IT9 while the surface roughness ≤6.3μm after peeling.The surface roughness can be less than 0.8μm if our straightening machines are used afterward.

About us

Yantai Haige International Trading Co.,Ltd., is a joint-stock enterprise engaged in exporting niche mechanical equipments produced in China to the markets abroad, which is located in Laishan district, Yantai City, Shandong Province, China.

The company is based on the manufacturing plant---Yantai Haige machine tools Co.,Ltd.

So far, the company has produced and sold more than 1500 sets of equipments.The machines are mainly used to process the surface of the steel, copper, titanium, magnesium, aluminum and other metal round bars, pipes and wire from Φ5mm~Φ500mm. The peeling machine, straightening machine and polishing machine can be combined into automatic production lines for processing and finishing of the bright steel which remove cracks, oxide layer, decarburized layer and other defects from the bar surface quickly. High quality bright bars, pipes and wire can be produced with high precision and high surface roughness whose working efficiency is several even more than ten times higher than that of the traditional technique.Our company is capable of supplying automatic production line in full sets by expanding varieties of the niche mechanical equipments.

After-sale service

1.Free quality guarantee period for 12 months

2.Free provide long-term technical support

3.Free train buyer's operator in seller's factory

4.Fast responce service within 24 hours

5.Our engineers can offer overseas service,including guiding

installation,commissioning,training,etc.

Packaging

More information,please contact me!Hope that we can create a win-win opportunity.