Specifications

SMC Machine For FRP Sheet
1.SMC 1000, 1200
2.With high quality and advance technology
3.PLC control

SMC Machine For FRP Sheet Name:      SMC Sheet Molding Compound Production Machine Line

                     SMC FRP Sheet Machine

                     

                 

 

 

 

1.Sheet Molding Compound Machine
2.With high quality and advance technology
3.  SMC 500, SMC 1000A, 1000B, 1200B, 1200C

 

 

 

 

Main technical parameters

 

 

Model	SMC-1000A	SMC-1000B	SMC-1000C
Sheet width	1000mm	1000mm	1000mm
Sheet thickness	2-3mm	2-4mm	2-5mm
The host running speed	6meters/minute	8meters/minute	15meters/minute
Single class production	7.5ton	9ton	24ton
Electrical control system	Electromagnetic stepless speed regulation	frequency control	PLC digital control system
Chain belt deviation control	Hand control	Automation control	Automation control
Fiber content	25-30	20-30	20-35
Fiber length	25mm	25mm	25mm
Fiber dimensions	2400g/km	2400g/km	2400g/km
Fiber model	Non-alkali yarn	Non-alkali yarn	Non-alkali yarn
Drive system	V-belt drive	V-belt drive	Gear drive
Total power	7.5kw	6kw	7kw
Dimensions(L*W*H)	5090x2000x1800	8000x3000x1800	8000x3000x1800
Net weight	2500kg	3000kg	3200kg

 

 

 

 

 

 

 

 

 

• This plant is used to produce Sheet Molding Compound (SMC) which is new type thermosetting molding plastics.

 

• This kind plastic are widely used in automotive industry, rail vehicles, construction, electrical, communication engineering, catering appliances, sports equipment etc. This unit produces smc sheet by forming sandwich structure which outside are two layer films and polyester resin, fiber glass, release agent, hardening agent ect in the middle.

 

• It adopts advanced mechanical structures & technilogy. It has achieved domestic advanced level with advanced technology and reasonable craft, high degree automation and high outputs.

 

• It is PLC digital control,including resin feeding.It can achieve vacuum charging resin to doctor blade.Even mixture, easy cleaning and more automation.

 

Advantage

 

Easy operation, low noise, obvious electricity conservation, small size, compact structure, low energy consumption, high durability, good looking, etc.

 

  

 

Main Parts :  host, curly part, cutting part and electrical control part

 

 

•  Host: frequency conversion motor. Materials are compacted by belt chains(SS) which are controled by pneumatic form.

 

•  Curly Part: torque motor driven; speed can be adjusted at any time; automatic; effort saving.

 

•  Cutting Part: variable speed motor; helical cutting roller(increase work life of rubber roller and blade); If high fiberglass content is required, such as above 30%, double roller can be designed on the machine. Any special requirements, contact me.

 

• Electrical Control Part: centrol control to meet production requirements;   components are well known brand.

 

 

Technical Specification

 

 

1. Convey device: conveying the PE sheet by chain belt whose drive controlled by variable frequency adjusting technology , running stable, high speed adjustment precision with the precision of varying frequency of 0.1hz

 

2.       PE sheet feed: feeding the upper and lower PE sheet by Pneumatic control membrane tension with the stretcher with the function of flattening and wrinkle-smoothing to ensure that the PE sheet can be conveyed to the  latexing area with constant tension and without wrinkle

 

3.       resin paste scrapping device: using high precision scraper and plate with the gap accuracy up to 0.05mm to ensuring that the resin paste can be coated evenly on the PE sheet.

 

    Pneumatic knife lifting device can make the scraper go up and down quickly and prevent the PE sheet damaged by the grain in the resin paste

 

4.       Glass fiber cutting device: the pressure from pneumatic control knife roller and Pad pressure roller and screw installed blades make it run stable, prolong the service life of the blades and improve the quality of fiber glass yarn

   variable frequency adjusting controlled knife roller can ensure the accuracy

   with the use of chain belt speed adjusting device can ensure the high precision and stability of the fiberglass content

 

5.     Retting and compaction : consisting of a series of roller, pressing by the pneumatic roller ,which can ensure the quality o the sheet

 

 

 6.      wind-up and box-up : sheet can be packed in roll or in box

                     with tension adjustment equipment for the two packing way to ensure the quality

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

HOW TO GET FINAL SMC PRODUCTS?

 

A:after getting smc sheet/composite, you will need MOULD & Hydraulic Press to forming the final SMC Products, such as Electric Cable Box, Meter Box, Tile, Auto Spare Pare, Manhole Cover, Water Tank ect. 

 

 

 

OUR COMPANY GROUP

 

 

EXHIBITION IN U.S.A.  2011

 

 

2012 EXHIBITION IN GERMANY

 

 

 

 

DINNING PHOTO WITH CUSTOMER IN FRANCE