Specifications

Electric Power Pole Making Machine
1.Economical configuration
2.Make raw materials to poles without cooperation
3.ISO9001

Professional Electric Power Pole Making Machine   

 

This set equipment is the most economical configuration,with high efficiency and reliable quality,they can let users make raw materials to rough poles without cooperation.

 

 

 Pole Production Line Equipment (In Process) Component:

 

1. BTSZ-3000/14000 CNC Flame Cutting Machine

2. PKJ-16N Automatic Beveling Machine

3. 2-WE67K-600/7000 CNC Tandem Press Brake

4. LHF2000*24-14000 Gantry Hydraulic Seaming And Straightening Machine

5. LMHZ2500-14000 Gantry Large Diameter Submerged Arc Welding Production Line

6. HZ2000-6000 Single Arm Internal Welding Machine

 

 

The above equipment can order according to your euqipment and producing.don’t buy cause waste.please consult to us if you don’t understand.we can be your best staff officer with sincere heart.insure of your mistake buying.we will do our best to let your make the best use.

 

Processing flow:

 

1. Steel Plate Cutting To Trapezoidal Shape

2. Plate Bending On Press Brake To Circle Shape

3. Two Pieces Join Together and welding

4. Flange Making And Installing

5. Lamp Door Cutting

6. Hot Dip Galvanized

 

1. Model: BTSZ-3000/14000 CNC Flame Cutting Machine

1. Figure

2. Specification

This machine adopts gas to cut, quick speed, multi head cut at the same time, adopt PLC program. It can cut medium thickness sheet of simple shape. Especially for electric power pole, flange and so on. Cutting surface is smooth, no need machining again. It also can cut many profiled sheet. 

 

2. Model: PKJ-16N Automatic Beveling Machine

1. Figure

2. Specification

 

PKJ-16N Automatic Beveling Machine Has 1.5 Meters-2.5Meters Speed Per Minute. Less Than Thickness With 45mm And Material Tensile Strength 40 KG/MM² Steel Plate, The Machine Can Manufacture A Slope Width Of 16mm Welding Groove. According To The Actual Needs Of The Fabrication, It Can Machine To 18mm Width. And Adjust The Bevel Angle Within The Range Of 25° To 45°.
The Range Of The Models Can Cover Nearly 80% Of The Actual Demand Of The Customer Base, It Is The Most Cost-Effective And Best Integrated Performance Models.

 

 

3. 2-WE67K-600/7000 CNC Press Brake

1. Figure

 

2. Specification

Tandem Achieve Synchronization Working. Single Machine Was Combined By Worktable Ram And Right And Left Wall Board. Wall Board Adopt Assemble Structure Due To The Transportation. The Rack Has Enough Rigidity. Two Cylinders Install To The Right And Left Wall Board, Under The Effect Of Electric Operation System, Drive The Slider Running Down. On Slide There Is Upper Dies, When Upper And Lower Dies Touch Workpieces, System Raise Pressure, Form The Workpieces. Use Different Dies, Under Different Bending, Can Get The Different Types Of Workpieces. The Quality Is Reliable And Stable.

 

4. Model: LHF2000*24-14000 Gantry Hydraulic Seaming Machine

1. Figure

 

2. Specification

 

The Machine Is The Special Equipment To Make High Poles And Electric Power Pole. It Combined By Walking Motor To Drive Commissure Points To Seam And Under The Manual Spot Welding, It Has High Efficiency.

 

5. Model: LMHZ2500-14000 Gantry Large Diameter Submerged Arc Welding Production Line

1. Figure

 

2. Specification

 

The Machine Adopt Submerged Arc Welding, The Welding Power Is From Shanghai Welding Company, Automatic Recovered Flux. The Welding Is Continuous And Beautiful, Strong Penetration, Forming One Time, High Efficiency. The Speed Is 1-3m/Min, Is The Three Times To Gas Welding. It's The Best Machine With Fastest Welding Speed, Good Effect And Lowest Price.

 

 

 

 

6. Model: HZ2000-6000 Single Arm Internal Welding Machine

 

1. Figure

2. Specification

 

This Equipment Use For Machine Variety Of Welding Metal Containers, Metal Welding Structure. Take Advantage Of It And Be Equipped With Automatic Submerged Arc Welding Machine, Welding Roller Rack, It Can Be Welding Center. Column Arm Is Standard Rectangular Tubes.

 

 

 

 

Professional Electric Power Pole Making Machine : 

 

Designing, verifying and installation of this machine is according to

Standards hereinafter:

1.GB17120-1997 press brake safty technic condition

2.ZBJ620006.10-88 press brake noise limited

3.JB/T 2257.1-92 press brake safty technic condition

4.GB/T 14349-93 press brake precision

 

Quality and services

1.The course of designing, producing and selling are performed according to iso 9001.

2.Our company can suplly study , installation and provide parts and repairing service all of the life.

3.Free training and take charge of the adjusting.

4.When equipment arrived, do well of the after service on time,reply in 6 hours and arrive to user ends in three work days.

 

The above machine all made by us. We can choose correct machine according to your invest and request. We are full of experience to make light poles line. Welcome to visit our factory.