Specifications

Latex Household Gloves
1. non lined/dip flock lined/spray flock lined ect
2 Size: S, M, L, XL
3. Certification: CE/ISO

Specification latex household gloves:

 1.Type available: non-lined, dip flock lined, spray flock lined, cotton velvet inside, adding with long PVC sleeve ect..

2.Size: S, M, L ,XL; Normal length: 300-310mm, offer with length above 380 mm

3.Weight: dip/non flock lined for 40-80g; spray flock lined for 50-100g.

4.Color: normal yellow, red, natural color. orange, dark, green

5. Conforms to ASTM D4679 (02), ISO 9001:2000 Quality Management System

 

 

 

 

 

 

Technical data for latex household gloves:

 

Before ageing (ASTM D4679-02)		After ageing (ASTM D4679-02)
Tensile Strength	Elongation at break	Tensile Strength	Elongation at break
Min 10.0 Mpa	Min 500%	Min 7.5 Mpa	Min 375 %

 

 

Storage condition for durable use: 

 

.Store the glove in its original packaging protected from direct sunlight,, far from heat sources or electric equipment.

 

.It is recommended to check that the gloves are suitable for the intended use, because the conditions of use at the workplace may differ from the CE-type tests.

 

.It is not recommended for persons sensitized to natural latex,

 

.Put the gloves on dry, clean hands.

 

.Before taking off the gloves, rinse them under running water.

 

.Ensure the inside of the gloves is dry before putting them on again.

 

.Caution: Using the gloves or submitting them to a cleaning or laundering process which are not specifically recommended can alter their performance levels.