RC32S 5.8ghz 32CH+N500 5.8ghz 32CH 500mw video fpv antenna                          

The Skysight SKY-32S is not just another video fpv receiver, it is a tool for the FPV community. 

With one touch scanning of all 32 channels in the 5.8GHz band, this fpv receiver could save you more than just a few headaches. The fpv receiver could be used to make sure your channel is clear or to verify if you have the correct channel selected with those confusing dip switch charts. The compact fpv receiver has dual video outputs for monitors, goggles and DVR’s. You could even just use it as a scanner for those that fly fpv with others and it is compatible with all popular 5.8Ghz A/V transmitters available on the market

Special Features of fpv Receiver :

A key to automatic signal search.

32ch working channels, compatible with all popular 5.8G A/V transmitters available on market.

Features of fpv Receiver

• 32 Channels Digital Display
• 
  
• 1 button Auto Search all 32 channels
• 
  
• 2 Channel AV output
• 
  
• Video format supported: NTSC/PAL
• 
  
• Antenna connection: RP-SMA, jack (module side)
• 
  
• Power input: 12V (3S lipo battery suggested)
• 
  
• Working current: 200mA max
• 
  
• Antenna impedance: 50ω
• 
  
• Antenna gain: 2db
• 
  
• Video impedance: 75ω
• 
  
• Video format: NTSC/PAL auto
• 
  
•  Dimension: 75x 65 x15mm
• 
  
• Weight: 80g 

Package Included:

• - 1 x fpv receiver (RX)
• - 1 x antennas (2dbI)
• - 1 x power wire

Product Instruction of fpv transmitter:

The SKY-N500 fpv Transmitter packs a whopping 500mW of ultra clean 5.8GHz power! A must for those looking for longer range and locked in video. The SKY-N500 can transmit a full range of 32 channels and comes with a clean pre-wired harness, it’s perfect for any long range aircraft!

 

The SKY-N500 fpv transmitter boasts an impressive new feature, the transmitting band and channel can be changed remotely by the user with a 3 position switch on their radio. This means you can quickly change to a clear band and frequency should you encounter interference on your existing channel.

Features of fpv transmitter:

l) 128*64 super bright color digital display with High Brightness & Contrast ,clearly visible under the sun

2) Channel and Frequency clearly visible on screen

3) Output power 500mw, distance no less than 1Km with 2dbi Omni directional antenna

4) Support 2-6S battery and low battery alarm

5) Battery Voltage display

6) Screen Display: Current/Temperature/PA Power detection

 

Each unit SKY-N500 will come with the "User Manual",tell you the "Opetration Guide":

1)Channel/Frequency Setup;

2)Low Battery Warn Setup;

3)Turn on/off Beep

Precautions:

1.Please never power the transmitter without the antenna to avoid damage.

2.Please make sure the power source +/- is the same as the transmitter to avoid damage.

3.It's suggested to connect external power supply if there is twill interference with the power output from the transmitter to the poor compatibility cameras or other equipments.

4.The 5V 100mA Output on the transmitter can power the remote control receiver.While please don't connect equipment with more than 5V as it may damage the transmitter.

Product