Product Details

HR500 automatic soldering station with Touch Screen and optical alignment system

Product Description

Number	Name	Functions	Use ways
1	Limit bar	limit the lowest position of the upper heating	Rotate to the right place
2	Tension adjustment knob	lock the upper zone of up and down ,before and after	Rotate the knob
3	Before and after adjustment handle	Adjust the upper zone of before and after position	Rotating the handle
4	7 handle	lock the rotation angle of the upper zone	Rotating the handle
5	Head light	Lighting equipment at work	Press the button
6	PCB plywood	Move the right position , clamping the PCB
7	The lower temperature zone height adjustment handle	Adjust the lower nozzle distance from the PCB board	Rotating the handle
8	Emergency stop button	Emergency stop	Press the button
9	light button	light switch	Press the button
10	The upper heating zone	generate upper hot air
11	Adjust the handle up and down	Adjust the upper zone of the position up and down	Rotating the handle
12	Upper heating nozzle	To focus the hot air	Pull air from the BGA suitable location
13	Lower part of the supporting frame	Prevent the PCB board fall down	Move the right position to withstand
14	Lower heating nozzle	To focus the hot air	Pull air from the BGA suitable location
15	Cross flow fan	Cooling the PCB board after weilding
16	Infrared heating zone	BGA rework with warm-up
17	Temperature Interface	Connect an external galvanic , measure the actual temperature	Directly connect temperature line
18	Touch screen	Data storage system platform

HR500 specifications

Total Power consumption	4800W
Top heater consumption	800W
Bottom heater consumption	Lower heater 1200W,bottom pre-heater 2700W(lager heating area)
Voltage	AC220V±10% 50/60Hz
Dimensions	L800×W900×H950 mm
Positioning	V-groove, PCB support can be adjusted in any direction with external universal fixture
Temperature control	K Type temperature Sensor and Closed loop
Temp accuracy	±2℃
PCB size	Max 500×400 mm Min 22×22 mm
BGA chip	2X2-80X80mm
Minimum chip spacing	0.15mm
External Temperature Sensor	1,can be added
Net weight	45kg

HR500 main features

It is with embeddedindustrialPC, high definitiontouch screeninterface, PLCcontrol, and instantprofileanalysis function.
Real-time settingandactualtemperature profile display , so users can analyze and correct parameters when need.
HR500C applies high precise K-type closed-loop control and automatic temperature adjustment system. Together with PLC and temperature module, users can control the temperature efficiently and can keep the temperature deviation of ± 2 ℃.
Meanwhile, HR500 is equipped with external temperature sensor which can detect, analyze and certify the temperature precisely.
HR500 uses V-groove fixture design which can help locate the PCB quicker, more accurate and easier. And also it is equipped with universal movable jigs which make repair irregular PCB boards with different size of BGA easily.
HR500 uses movable and retractable universal fixture which can protect PCBA from deformation, and avoid damaging the surrounding components from. And it is suitable for different component packages reworking.
HR500 is equipped with different kinds of alloy air nozzles which can be rotate in 360 degrees for easy positioning and they can be installed and replaced easily.
HR500 has three independent temperature zones, and each can run their own specific temperature profiles independently at the same time with PID control and can get to the best soldering effect.
The setting of the heating temperature, time, slope, cooling and vacuum suction can all be finished through the TFT touch screen.
Top and bottom temperature zones can be set 6 to 8 temperature files and can store more than thousands of profiles for different BGA reworking. Users can select, analyze, set and certify those profiles on the touch screen.
HR500 applies high power cross flow fan cooling system uses which can cooling the PCB quickly to avoid deformation. HR500C is with built-in vacuum pump and external vacuum suction pen which facilitate removing the BGA chip time.
HR500 is equipped with alarming function which will alarming 5-10 seconds in advance before the soldering or desoldering finished.
When the top and bottom stop heating, the cooling system starts working until the BGA rework station down to room temperature, which can protect the machine from aging.
HR500 is equipped with emergency stop button and automatic power off device, which can make sure safety working.
HR500 use drawer design repair window, if users need to check or repair the machine, just draw the repair panel out then repair.
HR500 is equipped with emergency stop switch and automatic power-off protection device in case of emergency happening.