Specifications

The universal dividing heads are one of the most important accessoories to cut flutes, spur gears,spiral gears.

Order No.		410-0407	410-0408	410-0409	410-0410
Center height (mm)		80	100	125	160
Dia. of spindle nose taper (mm)		36.541	41.275	53.975	53.975
Width of locating key (mm)		14	14	18	18
Upward swivel angle of spindle from its Hor. Position (degree)		0~6	0~5	0~5	0~5
Downward swivel angle of spindle from its Hor. position(degree)		0~90	0~95	0~95	0~95
Worm gear ratio		1:40	1:40	1:40	1:40
Taper of spindle bore		3MT	3MT	4MT	4MT
Min. readout of vernier		10"	10"	10"	10"
Spindle Rotataion Angle per revolution of dividing handle		9 degree	9 degree	9 degree	9 degree
Index error for one compete revolution of dividing handle		60"	+/-45"	+/-45"	+/-45"
Accumulative Error at 1/4" any 1/4" periphery of spindle		+/-1 minute	+/-1 minute	+/-1 minute	+/-1 minute
Max. bearing (Kg)		80	100	130	130
Holes of Index Plate	Side I	24,25,28,30,34,37,38,39,41,42,43
	Side II	46,47,49,51,53,54,57,58,59,62,66
Change Gears	Module	1.5		2
	Teeth Numbers	25,30,35,40,50,55,0,70.80,90,100
Net weight (Kg)		36	67	86	130
Gross weight (Kg)		42	79	126	149
Case dimensions (mm)		542x403x220	616x465x265	635x530x310	710x535x342

 

The universal dividing heads are one of the most important accessoories to cut flutes, spur gears,spiral gears