Carbide Insert: TNMG

Turning Insert for Steel, Semi-Finishing, Negative, CVD coating

Chip breaker: MD
Useage: For Semi-finishing turning of Steel, With wide application in Steel machining.
Recommended cutting parameters: ap=0.2-8.6mm; fn=0.1-0.65mm/r
Process: longitudinal turning, facing and copying
Charactoristic: High reliablity and universality with fault-free cutting.It can get better efficiency when it matches with wear-resisting grades.
Typical parts: Axles, Hubs, Gears, etc.

Recommended grade: CTS101
ISO classification: P15 (P10-P20); K15 (K10-K20)
Color: Black/Yellow
Application recommendation: CVD coating grade, wear-resistance materials coated on gradient sintered substrate with good hardness and toughness. Can bear high temperature. It is used for finishing to roughing machining of Steel and Steel casting, continuing cutting to light interruped cutting.

Recommended grade: CTS251
ISO classification: P20 (P10-P20); M15 (M10-M20)
Color: Black/Yellow
Application recommendation: universal grade, CVD coated on gradient substrate. It is used for finishing to roughing machining of Steel and Steel casting, continuing cutting and interruped cutting.

Optional grade: CTS371
ISO classification: P30 (P25-P40)
Color: Black/Yellow
Application recommendation: CVD coating grade, thick wear-resistant coating on high-strength alloy substrate. Edge line security for interrupted cutting with high metal removal rate. Used for machining Steel and Steel casting in bad conditions.