Specifications

Hook and Hook DIN1480 Turnbuckle
Type:drop forged din 1480
Material:Q235.
Dimension:M6-M38

Hook and Hook DIN1480 Turnbuckle

 

Type:drop forged din 1480
Material:Q235.
Dimension: M6 to M38 

 

 

 

Type:This is German Din 1480 type. We have other types for your choice like US type,JIS,Commercial,etc.
Material:Q235,other like 45#,Q235,Malleable Iron,etc.

 

Application:

 

A turnbuckle, stretching screw or bottlescrew is a device for adjusting the tension or length of ropes, cables, tie rods, and other tensioning systems. It normally consists of two threaded eyelets, one screwed into each end of a small metal frame, one with a left-hand thread and the other with a right-hand thread. The tension can be adjusted by rotating the frame, which causes both eyelets to be screwed in or out simultaneously, without twisting the eyelets or attached cables.

 

Double Eye turnbuckles din1480  are most commonly used in applications which require a great deal of tension; they can range in mass from about ten grams for thin cable used in a garden fence, to thousands of kilograms for structural elements in buildings and suspension bridges.

 

We manufacture varios turnbuckles including DIN,JIS,US,Commercfial Type with the model Jaw and Jaw,Hook and Hook,Eye and Eye,Jaw and Eye,Eye and Hook.

 

.

 

 

  

About us

 

We specializing in various riggings, such as shackles, turnbuckles, binders, hooks, eye bolts and nuts, clamps, thimbles, anchors, snap hooks, and stainless steel riggings.Meanwhile, we could take up processing business according to the drawings, samples and materials supplied from customers. 

 

 

 

 

If ther is any we can do for you,please don't hesitate to contact us or you can call 0086-13864873437 to find alan in 24 four hours.

 

Hook and Hook US Type Turnbuckle

 

 

 .Hook and Hook JIS Turnbuckles

 

We welcome your inquiry and visit.