Introduction of Dregs Rotary Dryer

Rotary dryer is mainly used for the drying of materials like slag, clay and coal dust in

building material industry or metallurgy industry, and leaching slag in metal beneficiation.

In order to control the temperature of the dryer, a thermocouple which can show the temperature change

of the dryer’s feeding and discharging ends is allocated on the feeding and discharging devices. This offers support for the better control of the working temperature in the drum. Rotary drum dryer is used in the drying of graininess material, and sticky paste material or high moisture material by adding materials. Its advantages: great production capacity, wide rang of application, small flow rate resistance, large fluctuation range in manipulation and convenient operation. It

is most used in the drying of sand, mineral powder, coal slurry, chicken manure and dairy manure. 

Application of Bean Dregs Rotary Dryer Rotary dryer can dry many kinds of materials which contain moisture, such as coal, coal 

slurry, slag, industrial waste, and clay stone. Rotary dryer are widely used in building

materials,metallurgy, and chemical industry. Rotary dryer is handlingby bringing it into direct contact

with a heated gas. The dryer is made up of a large, rotating cylindrical tube,the dryer slopes 

slightly so that the discharge end is lower than the material feed end in order to convey the

material through the dryer.

.

Working Principle of Dregs Rotary Dryer

The heat source of dryer is from combustion devices. This dryer adopts direct flow heating method. So the material should be sent to the shell by the feed chamber and feed chute.

After that the material will be pushed backward by the spiral shoveling plate. As the dryer is located with a tilt, the material flows to the end by the gravity and circumduction meanwhile

it is shoveled repeatedly by the shoveling plate to the upper end then comes down constantly, forming an even curtain in the drum and exchanging heat fully with the hot current in the drum. With the material being raised and scattered again and again, the moisture is dried gradually. Finally it is dried totally.

Strcture of Dregs Rotary Dryer

Rotary dryer machine is mainly composed of shell, back and forth supporting wheel,

 feeding and discharging unit and gear cap. The accessories which are not in the the

scope of this machine include firebox, feeding and discharging equipment, dust catcher,

etc.

Technical Data of Dregs Rotary Dryer

Characteristics of Dregs Rotary Dryer

1. The internal adopts assembled structure which has improved the accuracy of the 

equipment and it is easy to transport and install.

2. According to the characteristics of different fertilizers ,we have arranged the second 

granulation zone reasonably so as to improve the granulation effect .

3. Adopts assembled hoist board so as to exchange heat fully and lower the energy 

consumption 

4. Temperature induction monitor ,uniform vibration and airproof setting , which improve 

performance and productivity efficiently .

5. The assorted combustion furnace is a type of energy efficient and has the characteristics 

of smaller area , easy regulation and equipped with greenhouse

More Pictures 

Delivery of Dregs Rotary Dryer

Zhengzhou Jinma mining machinery

Company development:Established in 1976 . 

Company Tenet: Clients' interests first, quality first, after-sales service first  

Company spirit:Founding Integrity, Innovation Forever

Company philosophy: Jinma makes employees as fundamental, as quality to development, improve benefit by management, with innovation to develop market, in good faith to famous brand and use good service to make development.

Company strategy: Advanced, scientific, novelty and practicability.  

Company Goal:We manufacture lean products,  To provide higher quality products to customers more high-quality service.

Our advantages

1) our main productsjaw crusher, hammer crusher, PCZ heavy hammer crusher, DPC fine crusher, the PXJ third create sand machine, PCH ring hammer crusher, the PC hammer crusher and so on more than 30 varieties of broken machinery.

2) 38 years year of production experience

3) Processional Research and Development team

4) Strict quality contro

5) We provide competitive prices, reliable quality products and swift delivery

6)the products are exported to Chile, Peru, Vietnam, Indonesia, Malaysia, India, the Philippines, Thailand, Laos, Russia, Turkey, Iran, north Korea, kazakhstan, azerbaijan, Latvia and so on ,more than 30 countries and regions.

Remark: if need we help you design enginner drawing ,please tell us your workshop space,what;s your prodcts and how you want to delivery and packing your products,and products 's size .more further imformation we will be more appreciated.

Looking foward to your reply !