Product Details

Introduction of Gold Jigger machine

Saw-tooth wave jigger machine is a new type of gravity concentration equipment which is based on the traditional jig according to the distribution rule of jigging bed theory, its jig pulse curve likes the saw-tooth waveform which makes the upward flow faster than the downward; the upward flow time is short, the downward is long, which overcomes the shortcoming of upward flow, downward flow and action time produced by the sine-wave pulse curve, enhances the loose degree of the bed and alleviates the inhalation effects, then the heavy mineral particles in the ore are fully settlement, which enhances the sorting ratio and recovery of equipment.

Application of Saw-tooth wave Gold Jigger Machine

Saw-tooth wave jig Machine is a new type of energy-saving gravity concentration device. Due to its high processing capacity, large range of separation size and simplicity of operation and maintenance, It is widely used in the separation of gold, tin, tungsten, titanium, hematite, coal and other minerals.

Gold Jigger machine specifications:

Model	Hutch		Diaphragm		Feeding Size (mm)	Amount of make-up water (m3/t)	Make-up water pressure (Mpa)	Capacity (t/h)	Power (kw)	Dimensions (mm)	Weight (Kg)
Model	Shape	Area (m2)	Stroke (mm)	Frequency of Stroke (r/min)	Feeding Size (mm)	Amount of make-up water (m3/t)	Make-up water pressure (Mpa)	Capacity (t/h)	Power (kw)	Dimensions (mm)	Weight (Kg)
JT0.57-1	Trapezoid	0.57	8.5—12 10—17 12-21	80-180	<6	1-2	≥0.05	1.5-3	1.5	1550×780×1530	610
JT1-1	Trapezoid	1.04			<10	2-3		2.5-5	2.2	2270×1110×1890	900
JT2-2	Rectangle	2.28			<10	2-4		5-10	3	3225×1550×2050	1640
JT3-1	Trapezoid	3	12-30	50-125	<10	3-6		7.5-15	5.5	2745×2000×3030	3085
JT4-2	Rectangle	4	25-57		<25	4-8		8-20	7.5	4240×1990×2750	3098
JT4-2S	Rectangle	4	25-57		<25	4-8		8-20	4×2	4240×1990×2750	3500
JT5-2	ATrapezoid	4.86	12-30		<10	3-6		12-25	7.5	3600×2000×2600	4500