Specifications

LX1390 laser engraving machine
1)stepper motor
2)CE,FDA certificate
3)DSP off-line control system
4) with up and down table

LX1390 pictures laser engraving machine

 

 

 

 

Machine exhibition:

 

 

Detailed parts:

 

It include:laser tube,lens,RDCAM DSPcontrol system,auto up-down table,laser head(auto focus,red dot pointer),

 

honeycomb table,square rails(made in Taiwan),stepper motor,leadshine driver etc

 

 

 

 

Standard accessories of the machine
Including air pump, exhuast fan, cooling system.

 

                 

 

        Exhaust-fan                           Air pump

 

Exhuast fan is for collectting                   Air pump is for blowing the smoke out of

 

the smoke in the laser process.                  the laser path to make sure perfect cutting

 

It's installed behind the machine                 kerf or engraving effect. It's installed behind

 

and the air entry is under the                        the machine and the blows mouth is in the

 

working table.                                                  laser head.

 

 

 

 

         Cooling system

 

       (water pump or industry chiller)

 

   Cooling system is for cooling down the CO2 laser tube

 

   to make sure the laser tube working in stabletemprature.

 

   It's installed out side of the machine and the cooling

 

   water pipes are linked with the laser tube.

 

 

 

About water pump:

 

Generally speaking a water pump is OK for 40W and 60W CO2 laser tube, but it require the operater keep attention on the water temprature, and need to replace the water every few hours. It is not efficient.

 

So for customers who have enough budget or run the machine in the tropics area, we suggest a lower powered indsutrial chiller for their 40Wand 60W laser engraving machine.

 

About industry chiller:

 

All high power (over 60W) Careel laser machines are equipped with industrial-grade water cooling chillers instead of water pump to keep better cooling effect, which extremely extend the lifetime of laser tubes.

 

Full-automatic temperature control chiller can adjust refrigerating output and water flow automatically to keep steady temperature according to different working environments. It enables Careel laser system to work very well even in tropical regions.

 

Meanwhile, when the temperature of laser tube goes too high after long run, the chiller will raise the alarm to remind you to change water or check if any failures happen.

 

 

 

[Optional accessory] - Rotary systems for Cylindrical Items
The Rotary systems allows you to engrave wine bottles, mugs, wood, and more.

 

 

 

 

 

 

Type A: For cylinders engraving, even objects have different diameters on each end. 
Type B: For cylinders engraving. 
It is specially designed for up & down working table lasers, it has been built to accommodate 
a large variety of shapes and sizes. The attachment easily adjusts for different lengths.

 

 

 

The feature of LIANGXUN Laser:

 

1)with reci laser tube,the tube life time is about 10000hours.

 

2)with auto up-down worktable 420mm,suitable for thick materials engraving cutting.

 

3)with honeycomb & blade double table,suitable for all soft and hard nonmetal materials.

 

4)with auto focus can adjust focal length by machine automatic not by hand.

 

5)with red dot pointer can let you know the accurate position of laser.

 

6)adopt the RDCAM DSP control system , it is easy to operate, and you can use corel draw , photoshop .

 

auto CAD with the RDCAM software

 

7)our warranty is one year for whole machine,if any problem happen or parts broken in one year ,

 

we can repair and change parts for free

 

 

 

Technical parameter:

 

Model	LX1390
Working area	1300mm*900mm
Whole machine size	1830*1130*1110mm
Laser-type	Seal Co2 glass laser tube
Laser power	100w (option:80w,130w,150w) about 10000hours life time
Cooling mode	Water-cooling and protection system
Engraving speed	100-600mm/s
Cutting speed	0-30mm/s
Resetting position accuracy	±0.05mm
Minimum shaping character	English 1×1 mm
Graphic format supported	BMP,HPGL,PLT,DST and AI
Controlling software	DSP control system
Compatible software	Coreldraw ,AutoCAD,Photoshop
Driving system	Stepper
Working voltage	AC 110-220V±10%,50-60HZ
Operating temperature	0-45C
Operating humidity	5-95%
Option	up-down table, rotary device, auto focus, red dot pointer position
Spare parts	laser tube, mirrors, lens

 

 

 

 

paper,and other nonmetal materials.

 

Advertisement marking,Architectural decoration,crafts glass,Furniture,wood package,mold,toy,cloth,ect.

 

 

 

Samples:

 

acrylic cutting:

 

 

wood cutting

 

 

 

 

 

 

Champagne glass and Wine glass engraving

 

 

 

 Note: all the sample pictures are from our customer

 

Packaging Detail: wood box

 

 

 

 

We are professional laser engraving cutting machine manufacturer with 10 years experiences in China.

 

All products have been certified by the CE,FDA,SGS,ISO, and have been exported to South Asia, East Europe, Africa and South and Mid-America, Australia and so on .

 

Our factory: