Name: Level and distance measuring analogue / digital output long range ultrasonic level sensor Quality Choice Most Popular
Brand: Kacise
Availability: InStock

Product Details

Level and distance measuring analogue / digital output long range ultrasonic level sensor

Product Description

Brief introduction of ultrasonic sensor

This ultrasonic sensor provides very short to long-range detection and ranging, in a compact, robust PVC or stainless steel housing, designed to meet IP67 water intrusion. The power 9.0V-28V operation detects objects from 0.1meters to 10meters and provides sonar range information from 0.25meters out to 10meters out with 0.001meters or 0.01meters resolution. The interface output formats included are pulse width output, analog voltage output, NPN/PNP output and serial digital output.

Features

Features of long range ultrasonic leve sensor

High sensitivity
Designed for outdoor or indoor environments
9V-28V supply with very low average current draw
Sensor operates at 40 KHz, 112 KHz, 175 KHz, 300 KHz, 1 MHz
Free run operation can continually measure and output ranger information
Multi-kind output type such as analog (40-20mA, 0/1-5V, 0/1-10V), RS485, Can bus.
Readings can occur up to every 33mS(30Hz) within 3meters or occur up to every 80ms(12.5Hz) within 10meters.

Applications of Kacise ultrasonic sensor

Tank level measurement
Bin level measurement
Proximity zone detection
People detection
Robot ranging sensor
Autonomous navigation
Multi-sensors navigation
Distance measuring
Long range object detection
Industrial sensor

Product

GXUS-M56 long range ultrasonic sensor

Parameter
Range	50...500, 100...1000, 200...3000, 300...5000, 500...6000mm
Resolution	3mm or 0.1%(which is bigger)
Response time	< 200ms
Display	LED
Emission angle	20°
Analog output	4~20mA/500Ω LOADING
Switch output	RELAY DC 30V/ 5A , PNP/NPN(OPTIONAL)
RS232/485	MODBUS protocol or customized protocol (optional)
Power supply	Standard 24VDC (±15%)
Ambient temperature	-20~+60°C
Protection Class	IP65 (IP66 is selectable)
Installation	M56*2

GXUS-M18&M30 long range ultrasonic sensor

Parameter
Sensing range		70 ... 1000, 120...2000, 200...3000mm
Standard target plate		100x100(mm)
Transducer frequency		approx.255 kHz
Response delay		approx.125ms
Output type		1 analog output 0-10V or 4…20mA.
Resolution		0.11 mm at max. sensing range
Deviation		±1 % of full-scale value
Repeat accuracy		±0.1 % of full-scale value
Load impedance		>1kOhm
Temperature influence		±1.5 % of full-scale value
Ambient temperature		-25 ... 70 °C (-13 ... 158 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Connection type	Device connector M12 x 1 , 4-pin
Protection degree	IP65 (IP66 selectable)
Material	Housing: nickel plated brass or stainless steel or plastic
	Transducer: epoxy resin/hollow glass sphere mixture; polyurethane foam

Display
LED blue	Power on
LED yellow	solid: object in the evaluation range
	flashing: program function, object detected
LED red	solid: Error
	flashing: program function, no object detected

Power supply
Operating voltage U_B	10 ... 30 VDC , ripple 10 %SS
No-load supply current I₀	≤45 mA

Adjusting the evaluation limits

The ultrasonic sensor features an analogue output with two teachable evaluation limits. These are set by applying the supply voltage -UB or +UB to the TEACH-IN input. The supply voltage must be applied to the TEACH-IN input for at least 1 s. LEDs indicate whether the sensor has recognized the target during the TEACH-IN procedure. The lower evaluation limit A1 is taught with -UB, A2 with +UB.

Two different output functions can be set:

1. Analogue value increases with rising distance to object (rising ramp)

2. Analogue value falls with rising distance to object (falling ramp)

Evaluation limits may only be specified within the first 5 minutes after Power on.

To modify the evaluation limits later, the user may specify the desired values only after a new Power On.

TEACH-IN rising ramp (A2 > A1)

- Position object at lower evaluation limit

- TEACH-IN lower limit A1 with - UB

- Position object at upper evaluation limit

- TEACH-IN upper limit A2 with + UB

TEACH-IN falling ramp (A1 > A2)

- Position object at lower evaluation limit

- TEACH-IN lower limit A2 with + UB

- Position object at upper evaluation limit

- TEACH-IN upper limit A1 with - UB

Default setting

A1: unusable area

A2: nominal sensing range

Mode of operation: rising ramp

LED Displays

Displays in dependence on operating mode	Red LED	Yellow LED
TEACH-IN evaluation limit Object detected No object detected Object uncertain (TEACH-IN invalid)	off flashes on	flashes off off
Normal mode (evaluation range)	off	on
Fault	on	previous state

Photos:

Packaging & Shipping

Our Services

Our Services

Sensor can be customized by your special request, We can supply technical consulting service for your user.
The quality principle: Quality is the best sales
Payment: We accept T/T, PayPal, Western Union, MoneyGram , Escrow
Shipping:
1. All parts will be shipped out within 1 - 3 working days after confirm the payment
2. DHL / FEDEX / UPS / EMS / TNT / China Post /Aramex
3. We are not responsible for force majeure accidents, delays or other issues, like the shipping service.

After-sales service
We can offer good technical support and good warranty for you after service as professional manufacturer.

Warranty: One year
During the warranty, if the goods after delivery are damaged with error caused only by itself quality problem, the goods can be returned for free repair and maintenance. however, if the goods is damaged with error caused by user’ s man-made and force majeure factor, we will be not responsible for free repair and maintenance.

FAQ

1. Are you a trade company or a manufacturer?
A: We are an ISO, CE approved manufacturer specialized in pressure and level measurement products. OEM & ODM service are available.
2. What is your delivery time?
A: The delivery time is about 5-7 days after receipt of payment.
3. What is your payment terms?
A: 30% deposit in advance and 70% balance before shipment.

Certifications