Specifications

Corner air shower room
1) Automatic blowing
2) Electronic interlock
3) Intelligent air shower
4) High quality

Automatic HVAC HEPA air shower

Automatic sliding door air shower

 

Corner air shower room

 

 

Description:

 

Clean room Air Shower is a kind of partial clean equipment with rather strong universality and is installed at the partition between the clean and non-clean rooms. Its used for the personnel or matters to shower before entering the clean area. After using it, the dust could effectively be reduced to enter the clean area and maintain the normal working status.

 

Material:

 

Outside case: 1.2mm cold rolled steel with powder coated or staniless steel(SUS#201 OR 304)

Inside case: 1.2mm cold rolled steel with powder coated or staniless steel(SUS#201 OR 304)

Doors: SUS#201,SUS#304 or aluminum alloy

Base: SUS#201 or 304

Nozzles:SUS#304

 

Features:

 

1. The control system run automatically, the two doors electronically interlocked, with photoelectric sensor 

  (One door in open state, the other door must in close state. When people enter air shower, the system will shower automatically by photoelectric sensor)

2. Air shower time from 0 to 99 seconds which can be adjustable

3. Pre filter and HEPA filter

 

Control system:

 

 LCD control panel, electronic interlock and automatic blowing by photoelectronic sensor.

 

 

Optional accessor

1.Manul swing door or automatic sliding door

2.HEPA filter or ULPA filter

3. The case is used of cold-rolled steel plate / all stainless steel air shower / just stainless steel inside

4. Common fluorescent lamp / UV Sterilizer lamp   

5.  With voice announce

6. Omron or Mitsubishi PLC control system

 

Standar size and specificaton:

Model	Air shower					Cargo Air shower
	ZS-FL-1300	ZS-FL-1540A	ZS-FL-1540	ZS-FL-1540-1D		ZS-FL-2000 (2D)	ZS-FL-2300- (5D)
External dimensions (mm)	1150x800x 2050	1400x1000x 2050	1400x1200x 2050	1400x1600x 2050		1800x2000x2050	2100x5000x 2050
Dimensions in WxHxD(mm)	800x750x 1920	800x950x 1920	800x1150x 1920	800x1550x 1920		1200x1950x 1920	1500x4950x 1920
Material for case	Cold rolled steel with powder coated , SUS#201 or SUS#304
Suitable person	1	1	1-2		2-3	Cart
Nozzles	6(one side)	12(two sides)	16(two sides)		18(two sides)	24(two sides)	60(two sides)
Blow power(W)	550	1100	1500		2000	2200	7500
Weight(kg)	Appro.250	Appro.400	Appro.600		Appro.900	Appro.1200	Appro.2800
HEPA filter’s dimensions	550x610x69 One piece	610x610x69 two piece	610x610x69 two piece		610x610x69 two pieces	610x610x69 four pieces	610x610x69 Ten pieces
Nozzle diameter	32mm
Air shower time	0~99s Adjustable
Spurt wind speed	20~25m/s
Voltage	380V/50Hz/3Ph; 220V/50Hz/1Ph
hepa Filter efficiency	Above 99.99% efficient on 0.3um particles
Control system	LCD control panel, electronic interlock and automatic blowing