Specifications

TDXE4202 x10 power socket micro module(2200W)
46*46/23mm/pc 60g/pc
Bidirectional communication by PLC
CE approved

Features: 

l          Bidirectional communication by power line in high speed with the feedback function

l          Join with any type of switches, and plug-in panel.

l          Ultra-slim design. Dimension:46X46X23mm

l          Easy use and quick setup. Can finish learning within 6 seconds.

l          Use noise filter circuit inside

l          Command ALL OFF for electronic appliances.

 

Technical Specification:

l          Rated Voltage & Frequency: 220VAC±10%,50Hz

l          Maximum Load :  <2200W

l          Static Power <0.5W

l          Operating Temperature:  -10~50°C

l          Response Time for bidirectional signals <2s

 

Set up the address:

(Notice: Please refer to the specifications of the remote firstly…)

l         Repress the key ‘Setup’ 5 seconds, the indicator light will bright continually, and then enter the learning status.

l         Send the relative address code and ON/OFF order by remote(e.g. by TDXE6648 LCD Multi-Function Remote control)

NOTE: The Micro Module will exit the Program Mode to factory setting if no action is taken after 30 seconds (Factory setting: P01)

 

Operation:

After set up the address, you can control it through the methods as bellow:

 Any bidirectional or X10 controllers, such as our wireless remote, wall-switch centralized controller, telephone controller and intelligent control center etc.

 

Installation:

Connect and install it by the professional persons as the wiring diagram.

Avoid injury to people and products.

l          Shut off power.

l          Connection line according to label on the module.

Module's "L" connects with Live wire.

Module's "N" connects with Neutral wire.

l          Load connects with ‘1’ port.