Specifications
TDXE4203 x10 power socket micro module(1500W)46*46/23mm/pc 60g/pc
Bidirectional communication by PLC
CE approved
Features:
l Bidirectional communication by power line in high speed with the feedback function
l Join with any type of switches, and plug-in panel.
l Ultra-slim design. Dimension:46X46X23mm
l Easy use and quick setup. Can finish learning within 6 seconds.
l Use noise filter circuit inside
l Command ALL OFF for electronic appliances.
Technical Specification:
l Rated Voltage & Frequency: 220VAC±10%,50Hz
l Maximum Load : <1500W
l Static Power<0.5W
l Operating Temperature: -10~50°C
l Response Time for bidirectional signals< 2s
Set up the address:
(Notice: Please refer to the specifications of the remote firstly…)
l Repress the key ‘Setup’ 12 seconds, the module will sound ‘DI DI” It shows to connect with the traditional mechanical switch. (illus 1)
l Continuously press the switch (up-down) rapidly 6 times. Electrify load. Now pressing the switch will be no use, which means to enter the address setting state.
l Send the relative address code and ON/OFF order by remote(e.g. by TDXE6648 LCD Multi-Function Remote control)
NOTE: The Micro Module will exit the Program Mode to factory setting if no action is taken after 30 seconds (Factory setting: P01)
Operation:
After set up the address, you can control it through the methods as bellow:
Any bidirectional or X10 controllers, such as our wireless remote, wall-switch centralized controller, telephone controller and intelligent control center etc.
Installation:
Connect and install it by the professional persons as the wiring diagram.
Avoid injury to people and products.
l Shut off power.
l Connection line according to label on the module.
Module's "L" connects with Live wire.
Module's "N" connects with Neutral wire.
l Load connects with ‘1’ port.