Specifications
Easy use and quick setup. Can finish learning within 6 seconds.Use noise filter circuit inside
Integrate with X10 system.
TDXE4488 Door Lock Module
Features:
l Easy use and quick setup. Can finish learning within 6 seconds.
l Use noise filter circuit inside
l Integrate with X10 system.
Technical Specification:
l Rated Voltage & Frequency: 220VAC±10%,50Hz
l Frequency 433MHZ
l Static Power<0.5W
l Operating Temperature: -10~50°C
l Response Time for bidirectional signals≤ 2s
Set up the address:
(Notice: Please refer to the specifications of the remote firstly…)
l Repress the key ‘Setup’ 5 seconds, the indicator light will bright continually, and then enter the learning status.
l Send the relative address code and ON/OFF order by remote(e.g. by TDXE6648 LCD Multi-Function Remote control)
NOTE: The Micro Module will exit the Program Mode to factory setting if no action is taken after 30 seconds (Factory setting: P01)
Operation:
After set up the address, you can control it through the methods as bellow:
- Local control
Press setup button to send out OPEN command.
- Any bidirectional or X10 controllers, such as our wireless remote, wall-switch centralized controller, telephone controller and intelligent control center etc.
Note: It can only send out command OPEN
When use the controlling device to check out working status. If it responses ON, it just means the module has already get the command from the controlling device.
Installation:
Connect and install it by the professional persons as the wiring diagram.
