Specifications

smart home light IR sensor switch
3wire wall switch,built-in infrared motion detector
install in celling or on wall,easy use

the smart home light IR sensor switch is wireless sensor,very easy to install and setup,you can install it in celling or on wall.

when you enter the sensor,it can received signal to start work. not need wire or controller to do it.

 

I. Features:
3-wire wall switch induction switch, built-in pyroelectric infrared motion detectors, when the sensing range of activities as soon as someone lights, when people leave the sensor range or stationary when the timer, turn off the light delay to the scheduled time lights;
If the lights are turned off at the scheduled time, it was moving, to keep it in case of power will re-time, postponed the scheduled completion time after the lights turn off the light.

 

Second, technical performance:
1, the working voltage: AC220V.
2, load power: ≤ 500VA.
3, load type: all kinds of lights or appliances.
4, sensor angle: ≤ 100 ° cone angle.
5, sensing distance: ≤ 10 m, the angle between the edges of the sensor sensing distances.
6, light control adjustment: 0.1 ~ 2K Lux.
7, delay time: 10 ~ 300 seconds adjustable. Also customized according to user needs.
8 Dimensions: 86 × 86mm.

 

Third, use:
1, red line access FireWire; white lines connected load; the Blue Line as a public zero line, respectively, then the zero line and load zero power lines, non-short light mouth.
2, installation switches, was charged with direct light switch the lights do not close the window of induction.
3, should be avoided air conditioning, heating and other thermal air currents on the switch interference.
4, generally installed in the wall of 86 cassette Department