Vertical Hydraulic Guillotine Rubber Bale Cutter
USD $3,000 - $5,000 /Set
Min.Order:1 Set
Qingdao Bojia Machinery Manufacturing Co., Ltd.
Vertical Hydraulic Guillotine Rubber Bale Cutter
Usage
This guillotine rubber cutter is mainly used to cut natural rubber, synthetic rubber, and other plastics materials, especially it is suitable to be installed near the rubber mixer to cut small pieces of rubber.
Characteristic
This guillotine rubber cutter mainly consists of rubber knife, frame, cylinder, base, auxiliary table, hydraulic system, and electric system. The lead is casted on the base under the rubber knife for protecting the edge of the rubber knife. When cutting the raw rubber, put the raw rubber under the rubber knife, then press the start button, the knife can cut the rubber. Two limit switches are installed on the frame to control the reversal valve to change the movement direction of the rubber knife, at the same time it protects the cover of the cylinder.
Technical parameters
Type | XQL-240 |
Width(mm) | 860 |
Stroke(mm) | 660 |
knife number | two |
Travel time | 45 |
Power(KW) | 11 |
Overall dimension(LxWxH) | 2000*700*2400 |
Weight(kg) | about 1.5T |
It can be designed and manufactured non-standard special equipments based on
customers’ parameter.