TDXE4404S Touch Screen 2-way Fluorescent Lamp/Appliance Switch
USD $20 - $25 /Piece
Min.Order:1 Piece
Tianjin Taiyito Technology Co., Ltd.
Features:
l Replace conventional switches , replacing mechanical buttons with touch screen , longer life.
l LED backlight touch buttons for switch control,address code of lights is clear to see.
l Assorted many colors available so that to personalized the product.Gorgeously appearance is right down your decoration.
l The words displayed on the panel could be change according to customer’s require.
l Bidirectional communication by power line in high speed with the feedback function
l Can be installed in any 86 -style junction box , socket panel ; ultra-thin design .Dimensions : 86X86X39mm
l Simple setup, six seconds to complete the study; equipped with powerful noise suppression circuit.
l Touch switch control Fluorescent Lamp respond all ON & all OFF;touch switch control appliance only respond all OFF.
Technical Specifications:
l Rated voltage 220VAC ± 10%, 50Hz ;equipment load ≤ 1000W
l static power ≤0.5W ;ambient temperature: -10~50°C
l Two-way communication up time ≤ 2s
Usage: You can control light or appliance through the following control methods after address setup.
1 . After connected to the wires, to realize local control.
(1). Press " ON": the light/appliance will be open.At the same time the LED indicator light of “ON” will lighted and the color of the words displayed on the panel is blue . The LED indicator light will go out of itself without any operation in 10s.
(2)Press “OFF”: the light/appliance will be closed.At the same time the LED indicator light of “OFF” will lighted and the color of the words displayed on the panel is red . The LED indicator light will go out of itself without any operation in 10s.
Note:The control method of both two way is same.
2. Any high-speed bidirectional power line controller can control the switch, such as : wireless remote control, wall centralized control,telephone controller or intelligent control center etc.
Project Installation:
Connect and install it by the professional persons as the wiring diagram. Avoid injury to people and products.
l Cut off the power before installation ; according to the label for wiring module.
Touch switch’s "L"connects with Live wire.
Connect and install it by the professional persons as the wiring diagram. Avoid injury to people and products.
l Cut off the power before installation ; according to the label for wiring module.
Touch switch’s "L"connects with Live wire.