Specifications

Infrared sensor switch
accept OEM
MOQ:1 pc
Working Voltage:AC220V
Certification:CE

Infrared sensor switch 

 

Infrared sensor switch is one celling sensor,it contains thermoelectric infrared ray position detector. When the sensor was within the scope of activities, it immediately turns on the lights.  When the people leave the sensor range or keep stationary, the timer begin to work and delay to the scheduled time, and then the sensor turn off the lights. If there is somebody moving at the scheduled time, in the event of energizing, the sensor will re-time and delay to the scheduled time, then turn off the lights.

 

Specifications

Working Voltage	AC220V
Load Power	≤500VA
Load Type	various lamps or appliances
Induction Angle	≤100° coning angle
Light-controlled  Adjustment	0.1~2K Lux.
Delay Time	10~300 seconds, it can be ordered by user
Product Size	Φ90×35mm
Weight	100g
Package Size:	88*88*52mm/pc

 

Usage Method
This product is a self-contained. Do not enter the PLC system or ZigBee system.
The red line accesses the fire wire; the yellow line accesses the load; the white line, as a public zero line, accesses the zero line and the load zero line respectively. Prohibit short circuit of the lamp socket.
When you install the switch, the controlled electric lights should not straight shot the switch sensor window.
Avoid heat flow from the air conditioning or heating on the interference of the switching.
Usually installed on the roof or the wall.

 

 

Another model

 

Another model