Reflecting Aluminum Foil Insulation, buy DFR-101A D/S Reflective Aluminum Foil Insulation-140gsm on China Suppliers Mobile

Product Details

BondTape DFR-101A

D/S Reflective Aluminum Foil Insulation

Description & Application

Flame-retardant CM Grade D/S Foil Insulation. It is made from 2 outer layers of pure aluminum foil and 1 layer natural Kraft paper. These layers are bonded together with F/R Glue and reinforced with 3-way fiberglass scrim. It is ideally used as sarking and insulation under roofs, in walls behind cladding or under timber floors, for residential and commercial building. Combining with glasswool / rockwool / mineral wool / foam insulation, it is excellent as a vapor barrier and reflective foil insulation for air-conditioning ducts, pipes and vessels.

Product Construction

Composition	Description	Value (English)	Value (Metric)
Foil	Aluminum	0.28 mil	7 micron
Reinforcing - MD	Fiberglass	2 / inch	8 / 100mm
Reinforcing - XD	Fiberglass	3 / inch	12 / 100mm
Adhesive	Flame-Retardant Glue	------	------
Kraft	Natural	49 lbs / 3000 ft2	80gsm
Adhesive	Flame-Retardant Glue	------	------
Foil	Aluminum	0.28 mil	7 micron

Typical Physical Properties

Physical Properties	Test Method	Value (English)	Value (Metric)
Basis Weight	Scale	28.6 lbs / 1000 ft2	140 gsm
Permeance (WVTR)	ASTM E96, Procedure A	0.02 perm	1.15 ng/N.s
Tensile Strength - MD	ASTM D828	45 lbs/In	200 N/25mm
Tensile Strength - XD	ASTM D828	25 lbs/In	110 N/25mm
Burst Strength	ASTM D774	75.4 psi	52 N/cm2
Low Temperature Resistance	ASTM D1790 4 hrs @-40 °F (- 40 °C)	Remains Flexible No Delamination	Remains Flexible No Delamination
High Temperature Resistance	ASTM D1790 4 hrs @ +240 °F (+116 °C)	Remains Flexible No Delamination	Remains Flexible No Delamination
Emissivity	ASTM E408	0.03	0.03
Fire Rating	UL 723 / ASTM E84	Less 25 / 50 - Passed	Less 25 / 50 - Passed
Fire Rating	BS 476 Pt 6 & 7	Class O - Passed	Class O - Passed

Available Roll Width: 1.25m,1.35m

Remarks

1. The data above are typical results and subject to change without notice.

2. Tolerance: Weight and Thickness: ±10%; Width: ±3mm; Length: ±0.5%.

3. The products should be stored at room temperature, kept from wet and kept away heat source.

4. The users should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for their special purpose and technique.