BondTape        AF5025WL

Aluminum Foil Tape Without Liner

PRODUCT DESCRIPTION

A nominal 50 micron (2.0 mil) silicone release coated aluminum foil backing, combined with a high performance solvent acrylic adhesive.

FEATURES

• Aluminum Foil Tape Without Liner makes easy application.

• Aluminum backing provides excellent reflection of both heat and light.

• High quality adhesive with strong adhesion and holding power offers permanent sealing and bonding on Foil-Scrim-Kraft Facing joints and seams in HVAC ductwork application.

• Good aging resistance both indoors and outdoors.

• Low moisture vapor transmission rate offers excellent sealing and patching performance.

TYPICAL PHYSICAL PROPERTIES

TYPICAL APPLICATIONS: HVAC industry for joining and sealing Foil-Scrim-Kraft Facing laminated fiberglass blanket / duct board joints and seams; joining and sealing flexible air duct seams and connections. General purpose holding, patching, sealing and masking applications – indoors and outdoors.

PRODUCT FORM & SIZE AVAILABLE

ROLL WIDTH:  48 / 50mm (2") / 60 / 63mm (2.5") / 72 / 75mm (3") / 96mm / 100mm (4")

ROLL LENGTH: 50M / 100M / 150M / 200M / 250M / 300M

IMPORTANT NOTE

1. The data above are typical values only, and should not be used for specifications purpose.

2. Tolerance: Weight and Thickness: ±10%; Width: ±3mm; Length: Cut Roll: ±0.3m, Jumbo Roll ±0.5%.

STORAGE & SHELF LIFE: 12 months when stored at 21°C (70°F) / 50% relative humidity out of direct sunlight.

PRODUCT USE:It is essential that the user evaluate the BondTape product to determine whether it is fit for a particular purpose and user’s method of application. Good results will be obtained when applied to a clean, dry surface with a suitable pressure on BondTapeproducts between +10 ~ +40°C (+50 ~ +105 °F).