FEATURES

Aluminum Foil Tape Without Liner makes easy application.

Aluminum backing provides excellent reflection of both heat and light.

High quality adhesive with strong adhesion and holding power offers permanent sealing and bonding on Foil-Scrim-Kraft Facing joints and seams in HVAC ductwork application.

Good aging resistance both indoors and outdoors.

Low moisture vapor transmission rate offers excellent sealing and patching performance. 

TYPICAL PHYSICAL PROPERTIES

TYPICAL APPLICATIONS: HVAC industry for joining and sealing Foil-Scrim-Kraft Facing laminated fiberglass blanket / duct board joints and seams; joining and sealing flexible air duct seams and connections. General purpose holding, patching, sealing and masking applications indoors and outdoors.

PRODUCT FORM & SIZE AVAILABLE

ROLL WIDTH:  48 / 50mm (2") / 60 / 63mm (2.5") / 72 / 75mm (3") / 96mm / 100mm (4")

ROLL LENGTH: 50M / 100M / 150M / 200M / 250M / 300M

IMPORTANT NOTE

1. The data above are typical values only, and should not be used for specifications purpose.

2. Tolerance: Weight and Thickness: ±10%; Width: ±3mm; Length: Cut Roll: ±0.3m, Jumbo Roll ±0.5%.

STORAGE & SHELF LIFE: 12 months when stored at 21°C (70°F) / 50% relative humidity out of direct sunlight.

PRODUCT USE: It is essential that the user evaluate the BondTape product to determine whether it is fit for a particular purpose and users method of application. Good results will be obtained when applied to a clean, dry surface with a suitable pressure on BondTape products between +10 ~ +40°C (+50 ~ +105 °F).