Experienced manufacturer LVD Electrodeless Magnetic induction lamp
USD $80 - $150 /Piece
Min.Order:1 Piece
Chongqing Sonight Lighting Co., Ltd.
Experienced manufacturer LVD Electrodeless Magnetic induction lamp
Stadium.Warehouse.Storage.Airport.Workshop.Exhibition Hall.Etc...
Induction Lighting, unlike most other light technologies, does not use electrodes to create illumination. Rather than using electrodes or filaments, which is typically the first failure point
in a fluorescent lamp, induction lamps use magnets to conduct electricity. And with no electrodes to fail the Induction Light will last up to 100,000 hours.
Simply, here's how it works: rings with magnetic coils create an electromagnetic field using high frequency generated by an electronic ballast. This field goes around a glass tube and the closed loop formed by the discharge path is induced by the coils, causing acceleration of free electrons that collide with mercury atoms and excite the electrons. As the electrons reach a lower, more stable level, they give off energy in the form of invisible UV light. The UV light strikes the phosphorous lining in the tube, creating a reaction that changes the UV light to a harmless,
white visible light.
SN gives you 360 degrees of high quality lighting for your plant. HID lighting is a point source, meaning it is very intense at the center and then falls off from there. The SN light fixture will create a blanket of light over your plants. By mounting your light much closer to the plant canopy than you can with HID, you will get the most intense and deep light penetration possible to all parts of your crop. Typical HID lights have to be mounted away from the canopy, or use expensive heat mitigation techniques to get close enough for a blanket type effect, but can still never get as close as SN.
The closer you are, the more penetration you will have!
Need More Information?Contact us,we will respond you within 24 hours!